User manual STRONG SRT 8910

[. . . ] Digital Terrestrial Receiver with Embedded Conax SRT 8910 User Manual Picture similar PART 2 · English TABLE OF CONTENTS 1. 0 INTRODUCTION 1. 1 Safety Instructions 2. INTRODUCTION 2. 1 Front Panel 2. 2 Rear Panel 2. 3 Remote control 3. 0 CONNECTION 3. 1 Connecting to Terrestrial Antenna 3. 2 Connection to TV with HDMI cable 3. 3 Connecting to TV with SCART cable 3. 4 Connecting a Hi-Fi system 4. 0 GETTING STARTED 4. 1 Switching On 4. 2 First Time Installation 4. 3 Channel Search 5. 0 MAIN MENU 5. 1 Channel manager 6. 0 FUNCTIONS 6. 1 Standby/Power button 6. 2 Program Guide 6. 3 Changing Channels 6. 4 Volume Control 6. 5 Audio control 6. 6 Accessing the favorite channels 6. 7 Teletext 6. 8 Subtitle 6. 9 Show program information 6. 10 Switching between DTV and Radio mode 7. 0 SPECIFICATION A. 1 TROUBLESHOOTING 2 2 6 6 6 6 8 8 8 8 8 9 9 9 9 10 10 12 12 12 13 13 13 13 13 13 13 14 14 16 English 1 PART 2 · English 1. 0 INTRODUCTION 1. 1 Safety Instructions TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer to qualified Service for servicing. [. . . ] BE ENVIRONMENTALLY FRIENDLY Do not dispose batteries as normal rubbish. Please dispose batteries following the Government's regulation. 0 ~ 9 Switch to ON/STANDBY mode Enter numeric values and to select the channel directly by entering it's number Opens Favorite List Opens Teletext Opens Electronic Program Guide Menu Exit from menu Various functions Various functions Various functions Various functions Opens menu Channel Up/Down adjust volume BConfirms a choice Press for present channel information Choose audio: Left/Right/Stereo/ Mono UP/Down Left/Right Change between Radio and TV Subtitle menu No function English 7 3. pq tu TV/RAD SUB OPT PART 2 · English 3. 0 CONNECTION 3. 1 Connecting to Terrestrial Antenna You can connect the receiver to the following types: 1. Note: This receiver uses active antenna as standard. 3. 2 Connection to TV with HDMI cable Connect the antenna to ANT IN on the receiver Connect the TV HDMI plug on the receiver to the HDMI plug on your TV using a HDMI cable n Turn on your TV, connect and turn on your receiver You might have to choose HDMI channel on your TV to see Digital TV. In some cases your TV will automatically choose this when the receiver is turned on. n n 3. 3 Connecting to TV with SCART cable Connect antenna to the ANT IN input on the receiver. Connect the TV SCART socket on the receiver to the SCART input of your TV set by using a SCART cable. n Switch on your TV, plug in and switch on your receiver. You may need to select the AV (SCART) channel on your TV to watch Digital TV. In some cases your TV will automatically select this channel when the receiver is switched on. n n 3. 4 Connecting a Hi-Fi system Use the AUDIO L/R output for stereo sound to analogue Hi-Fi system. Use the S/PDIF or Optical* output for Digital sound to a Digital input on you Hi-Fi system. Note: To avoid interference you must use shielded audio cables. Never connect digital output to any analogue input. It is always advisable to consult your Hi-Fi instruction book. n n 8 PART 2 · English 4. 0 GETTING STARTED 4. 1 Switching On n n n Turn on your TV set. Turn on the main power supply to the receiver and press Power On/Standby. If TV set does not turn automatically to the SCART input, please select this input with the AV key, or similar on your TV remote control. English 9 4. 2 First Time Installation Set up wizard: n When the receiver is turned on for the first time you will see the menu "Set up wizard" n Choose "TV Format" by using tu buttons. (Use 4:3 if you do not have a wide screen TV, otherwise use 16:9) n Press "OK" for quick installation or "Menu" for advanced installation. n By using "Quick Installation" the channel search will start. n By using "Advanced Installation", "Language select", "TV/VCR settings", "Time settings" and "Antenna settings" be defined manually. n Choose "Language select" by using the pqtu buttons. Here you can set up; Menu language, 1st Audio lang and 2nd audio lang and 1st text lang and 2nd text lang n Choose "TV/VCR settings" by using the pqtu buttons. [. . . ] RiksTV is a registered trademark, all other product names are trademarks or registered trademarks of their respective owners. 01/2009 NOTE: Design and Specifications may be changed without warning. 15 English PART 2 · English A. 1 TROUBLESHOOTING In some regions, the digital terrestrial signal may be weak. In this case we recommend using an antenna with built in amplifier. [. . . ]