Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual STRONG SRT ANT 45. We hope that this STRONG SRT ANT 45 user guide will be useful to you.
Lastmanuals help download the user guide STRONG SRT ANT 45.
Detailed instructions for use are in the User's Guide.
[. . . ] This DVB-T/T2 antenna is an “Active type” antenna, it has a built-in low noise amplifier that amplifies the received signal for better performance. The antenna therefore needs 5 V power supplied by your terrestrial receiver, or by an AC/DC adaptor (supplied with the antenna). We recommend that you carefully read this user manual before you install the antenna. This will help you to get the best performance of your antenna. [. . . ] 3 English
H V
(Vertical-Broadcast) antenna mounted V: (Horizontal-Broadcast) antenna mounted H:
4. 1 To power the antenna with Digital Terrestrial Receiver
1. Turn on your TV set and turn on your Digital Terrestrial Receiver. 2. Press the “MENU” button on the remote control of your Digital Terrestrial Receiver. Check in the Set-Up or Installation menu of your receiver to see if the antenna power is set to “ON”. (Normally this is indicated in the menu as ANT power, Ext Antenna power or Active antenna power. ) Refer to the user manual of your Digital Terrestrial Receiver. 3. Once you are sure that your receiver supports 5 V antenna power, switch off your receiver and disconnect it from the 230 V main power. 4. Take the supplied “long” coaxial cable and connect the end with the “F connector” (screw type connector) to the antenna. Carefully press the inner lead of the cable into the Female-F connector at the back of the antenna. Turn the covering nut clockwise with your HANDS until it is fixed. 5. Connect the IEC Male end to your receiver. Normally the input connector on your receiver is marked as “ANT” (in) or as “RF” (in). Refer to the user manual of your Digital Terrestrial Receiver. 6. Connect your receiver to the 230 V main power and switch ON your receiver and TV set. 7. Proceed to 5. 0 “Antenna installation”. 4
3 1
1. Digital TV 2. STB 3. Active DVB-T/T2 Outdoor Antenna. 4. HDMI or SCART cable (optional) 5. Coaxial cable 6. Water-Drop Loop (recommended)
4 2
5
6
If your receiver does not support 5 V antenna power, then please follow the next steps:
4. 2 To power the antenna with external power adaptor
1. Switch OFF your receiver and disconnect it from the 230 V mains power. 2. Take the short coaxial (IEC Male to IEC Female) cable. Connect the IEC Male end to your receiver. Normally the input connector on your receiver is marked as “ANT” (in) or as “RF” (in). Refer to the user manual of your Digital Terrestrial Receiver. [. . . ] (Normally you can find the signal meter in the Channel Scan field of the menu). Refer to the user manual of your Digital Terrestrial Receiver. 3. Now optimise the signal strength by finding the best position for the antenna. Keeping the antenna in your hand, try to reach the highest or best possible position. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE STRONG SRT ANT 45
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual STRONG SRT ANT 45 will begin.
