User manual STRONG TDT PREMIUM BROCHURE

[. . . ] from mobile network 1 English PART 4 · English 1. 0 InsTRuCTIon 1. 1 safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. Read All Instructions ­ Before you use the product, read all operation instructions, For more information on accessories such as the lithium ion battery, refer to the manuals provided with those products. save These Instructions ­ Save all safety and operating instructions for future reference. [. . . ] Press oK to watch the selected channel in full screen mode. Use this menu to lock, skip, delete or rename channels or add them to a favourite list. Press the numeric button 1 to enter the Edit menu. Highlight a channel with the qp buttons and press oK to select or press numeric button 0 to select all channels. This way of selection can be executed for each of the edit functions. 6 5. 1. 1. 1 Edit PART 4 · English favor: lock: skip: Delete: Rename: To add selected channel or all channels to a favourite group, press the 1 button. Use the qp to select a desired group and press oK. With tu select Yes in the confirmation window and press oK to save. Selected channels will be marked with a folder symbol. Press 2 to Lock one channel or all channels. Use tu to select Yes in the confirmation window and press oK to save. Selected channel/s will be marked with the symbol. If On is selected, the receiver will provide 5V antenna power (for active antennas). Press EXIT button to exit. 5. 2. 4 lCn mode If LCN (Logical Channel Numbering) is activated and LCN signal is provided by the operator, channels will be stored in operator defined order. You can activate/deactivate the LCN function by setting the LCN Mode to ON or OFF. 8 PART 4 · English 5. 3 setup This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. Use pq to highlight the desired menu and press oK to proceed. Settings can be changed with the tu buttons. To get a better overview of possible settings, press oK first. Now you can select settings with pq and confirm with oK. Press EXIT button to exit. 5. 3. 1 osD language This menu allows you to set the OSD Language. 5. 3. 2 subtitles preference This menu allows you to set the preferred Subtitles Language and to switch Subtitles Type between Normal and Hard of Hearing. This menu allows to setup different settings concerning your TV set. Display Mode: PAL/NTSC/AUTO Aspect Ratio: Use this menu to configure the screen aspect. Possible settings are: 4:3PS (Pan&Scan), 4:3LB (Letter Box), 16:9 (Wide Screen) and AUTO. [. . . ] In Media+ menu, select Media Player and press oK to enter the menu. Use pq to select the desired item, and press oK or PlAY to play the desired files. Press EXIT to quit. 5. 5. 2 safely Remove storage Device In Media+ menu, select Safely Remove Storage Device and press oK to safely remove the USB device. A message indicating that the device can be removed, will be displayed. 6. 0 oPERATIon 6. 1 Changing Channels There are 4 ways of channel selection: stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). [. . . ]