User manual SUB-ZERO 427R-PS

[. . . ] 11/06 1 Planning Information Wine Storage Model 427R F E AT U R E S Full-size Wine Storage unit with 78 (750 ml) bottle capacity and two refrigerator storage drawers Integrated design accepts custom wood or stainless steel door panels offered in three stainless finishes Refrigeration system allows individual temperature control of the two wine compartments and ideal humidity Illuminated display shelf for those prize bottles Sturdy, rustproof wire shelves accommodate standard 750 ml bottles, half-bottles, as well as magnums Roller-glide shelves faced with natural cherry wood have a three-quarter extension for easy access Full-view glass door standard with UVresistant glass protection Solid door unit and high altitude glass unit can be special ordered Discreet low voltage interior lighting Service light indicator, optional lock and tie-in to home security system The exclusive dual action hinge has a built-in 90° door stop UL approved for US and Canada Two, five and twelve year residential warranty--exclusions apply; warranty information can be found on our website, subzero. com OVERALL DIMENSIONS 27 (686) 1 26 8 (664) DOOR FRAME 14 (356) 24 (610) (UNIT DIMENSION) 13 16 (20) 7 44 8 (1139) 3 10 4 (273) CENTERED VERTICALLY DOOR FRAME WITH HINGES 24" (610) DOOR / DRAWER CLOSED DOOR / DRAWER CLOSED 80 (2032) 90° 3 8 (9) 5 *78 8 (1997) 19 1/2"* 25 1/2"* (495) (648) 105° 25 7/8" (657) 1 2 (13) 1 13 4 (337) 9 2516 (650) DRAWER FRONT 4 5/8"* (117) 90° DOOR OPENING 1 *34 2 (877) MAXIMUM DOOR OPENING TOP VIEW *DOOR/DRAWER PANEL THICKNESS NOT INCLUDED ­ DIMENSION WILL VARY WITH INSTALLATION 1 10 4 (260) 3 20 8 (517) 3 94 (248) FRONT VIEW _ *1/2" (13) + ADJUSTMENT IN LEVELING LEGS 4 (102) SIDE VIEW Overall dimensions shown in the standard full-view glass door application. Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. 2 Planning Information Wine Storage Model 427R S P E C I F I C AT I O N S Model 427R Overall Width Overall Height DOOR OPTIONS Full-Size Wine Storage Unit with Refrigerator Storage Drawers 27" (686) 80" (2032) 24" (610) 78 Bottles (750 ml) 5. 3 cu ft (150 L) 79 1/2" (2019) 25 1/2" (648) 115 V AC, 60 Hz, 15 amp circuit Glass Door ­ 410 lbs (186 kg) Solid Door ­ 406 lbs (184 kg) High altitude glass doors are available for elevations 5, 000' (1524 m) or above Overall Depth 427RG 427RS 427RHAG Wine Storage Capacity Refrigerator Capacity Minimum Height Required Door / Drawer Clearance Electrical Requirements Shipping Weight Full-View Glass Door (standard) Solid Door High Altitude Glass Door You must allow 90 days from order to delivery for solid door and high altitude glass door units. PA N E L O P T I O N S Special Note /S /P /B Integrated (custom panels) Classic Stainless Steel Finish Platinum Stainless Steel Finish Carbon Stainless Steel Finish Specifications are subject to change without notice. Stainless steel full-view glass and solid door and drawer front panels are ordered and shipped as sales accessories and include tubular handles. ACCESSORIES Tubular handles in classic, platinum and carbon stainless steel Polished chrome handles for custom panel applications UL approved door lock kit Dual installation heater kit Accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero. com. Dimensions in parentheses are in millimeters unless otherwise specified. 3 Planning Information Wine Storage Model 427R I N S TA L L AT I O N S P E C I F I C AT I O N S TOP VIEW *PLACEMENT OF THE 1 1/2" ANTI-TIP BRACKET (38) SHOULD BE 24" (610) FROM THE FRONT OF THE UNIT WITHOUT PANELS TO THE BACK OF THE ANTI-TIP BRACKET. [. . . ] All Sub-Zero Wine Storage units are equipped with a power supply cord with a 3-prong grounding plug which must be plugged into a mating 3-prong grounding type wall receptacle. Locate electrical within the shaded area shown in the installation illustration on page 4. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Refer to the Wine Storage Installation Instructions packed with the appliance, which provides step-by-step procedures for making sure the unit is installed properly. Dimensions in parentheses are in millimeters unless otherwise specified. 5 Planning Information Wine Storage Model 427R I N T E G R AT I N G C A B I N E T RY Unless you are installing a stainless steel unit, you will need to provide a full door panel in the instance of a solid door unit, or a frame for the glass door application, where wine will be seen from the outside. You will also have to provide drawer front panels. If you order a stainless steel Model 427R, you will need to have the stainless steel panels and handles installed. A solid panel must not be installed on a glass door unit, as this may cause moisture to form behind the panel. I N T E G R AT E D PA N E L S If you are familiar with our Integrated line and its panel applications, this section will be relatively easy to understand. The Wine Storage solid door panels or frame panels for glass doors will follow some of the identical planning processes you learned with the Integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the Integrated units, the door panel for Model 427R will be attached with screws applied through our door. The drawer panels for the Model 427R will be applied using the Integrated technique of mounting brackets. IMPORTANT NOTE: The depth of Model 427R is 24" (610) from the front of the unit to its back. You MUST allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward. The glass door opening of the standard Model 427R is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. While the cabinet front stiles are a minimum of 2 1/4" (57), the top and bottom rails are different. Rails and stiles can be increased in size but should not exceed cabinet manufacturers standard width. They cannot exceed overall door panel dimensions specified, as they would interfere with the operation of the door. The back sides of rails and stiles that will be visible through the glass door will need to be finished. When ordering panels for a solid door unit, follow the overall panel dimensions indicated in the chart, rail and stile dimensions do not apply. [. . . ] If you choose to stain or seal the wood facing, be aware that some of these substances are hazardous and will damage stored wine. Dimensions in parentheses are in millimeters unless otherwise specified. 12 Planning Information Wine Storage Model 427R WINE STORAGE DOOR FRAME Glass C L Cabinet Door Profile 7/8" (22) 7/8" (22) 2 1/4" (57) Rail / Stile DOOR FRAME PROFILE F U L L - S C A L E T E M P L AT E The full-scale illustrations on this page and the following page enables you to understand some of the unique situations you may face as you design the Wine Storage units into homes. These templates can be easily photocopied or used in your tracings. The full-scale illustration above is typical of the Model 424 door frame profile, details of the other Wine Storage door frames will vary slightly. IMPORTANT NOTE: Rails and stiles must be wide enough to cover the door hinges. The back sides of rails and stiles that will be visible through the glass door will need to be finished. Dimensions in parentheses are in millimeters unless otherwise specified. 13 Planning Information Wine Storage Model 427R WINE SHELF WOOD FACING 5/8" (16) 7/64" (3) Maximum Thickness 11/2" (38) 27/32" (21) 5/64" (2) 2015/16" (532) WIDTH 23/64" (9) 9/16" (14) FRONT VIEW SIDE VIEW F U L L - S C A L E T E M P L AT E Use the full-scale illustration above as a template if you choose to replace the natural cherry wood facing with wood more complementary to your design and surrounding cabinetry. Dimensions in parentheses are in millimeters unless otherwise specified. 14 Planning Information Wine Storage Model 427R SUB-ZERO DOOR FRAMED CABINETRY IMPORTANT NOTE: The depth of the Model 427R is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back, or cabinets forward to achieve a flush fit. T 24 (610) TO BACK OF UNIT LINE OF INTERFERENCE* LINE OF INTERFERENCE* AT MAXIMUM DOOR OPENING 1 (3) MIN. [. . . ]