User manual SUB-ZERO SZDESIGN GUIDE

[. . . ] DESIGN GUIDE B U I LT - I N | I N T E G R AT E D | W INE S TORAGE | U NDERCOUNTER CONTENTS Built-In Refrigeration Integrated Refrigeration Wine Storage Undercounter Refrigeration Warranty 4 31 50 67 75 Features and specifications indicated herein and on our website are subject to change at any time without notice. Check our website, subzero. com, for the most up-to-date specifications. The information and images in this guide are the copyright property of Sub-Zero Freezer Company, Inc. Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero Freezer Company, Inc. all rights reserved. SUB-ZERO ® is a registered trademark of Sub-Zero Freezer Company, Inc. WELCOME TO SUB-ZERO We make the ultimate built-in, integrated and undercounter refrigerators, freezers and wine storage units. [. . . ] Also refer to the full-scale illustrations at the end of this section for specifics on door openings. 26 3/4"* (679) PANEL WIDTH (610) 24" A 45 3/8" (1153) (2032) 80"* 79 7/8"* (2029) 27" (686) WIDE MODELS Installation of a 27" (686) wide Integrated base or tall unit within frameless cabinetry. A 13 9/16" (345) A *Dimensions may vary. 341/2" (876)* 16 11/16"* (424) 4"* (102) (686) Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. 27" SIDE VIEW TOE KICK FINISHED OPENING A) ALL REVEALS ARE 1/8" (3) *DIMENSIONS MAY VARY 35 3/4"* (908) PANEL WIDTH 36" (914) WIDE MODELS (610) 24" A Installation of a 36" (914) wide Integrated tall unit within frameless cabinetry. *Dimensions may vary. 45 3/8" (1153) (2032) 80"* 79 7/8"* (2029) Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. A 13 9/16" (345) A 341/2" (876)* 16 11/16"* (424) 4"* (102) (914) 36" SIDE VIEW TOE KICK FINISHED OPENING A) ALL REVEALS ARE 1/8" (3) *DIMENSIONS MAY VARY 43 PANEL CONSIDERATIONS The illustrations below provide panel width dimensions for installation of a single tall unit, 27" (686) and 36" (914) wide models. Illustrations on the following page provide panel width dimensions for installing two tall units side by side, 27" (686) wide models and 36" (914) wide models. IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit. I N S TA L L AT I O N To install integrated panels, see the detailed procedures outlined in the Sub-Zero Integrated Installation Guide. 27" (686) WIDE MODELS 27 Panel width dimensions for installation of a 27" (686) wide tall unit. * 1 (3) min 8 REVEAL (686) 3 26 4 (679) * 1 (3) min 8 REVEAL 3 4 (19) PANEL Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. 25 (635) 7 25 8 (657) 25 (635) CABINETRY OR SIDE PANEL 24 (610) APPLIANCE DOOR WIDTH TO BACK OF UNIT CABINETRY OR SIDE PANEL SUB-ZERO UNIT *SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL 36" (914) WIDE MODELS 36 Panel width dimensions for installation of a 36" (914) wide tall unit. * 1 (3) min 8 REVEAL (914) 3 35 4 (908) * 1 (3) min 8 REVEAL 3 4 (19) PANEL Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. 25 (635) 7 34 8 (886) 25 (635) CABINETRY OR SIDE PANEL 24 (610) APPLIANCE DOOR WIDTH TO BACK OF UNIT CABINETRY OR SIDE PANEL SUB-ZERO UNIT *SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL 44 As the reveal between cabinets and the Integrated unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing. When 3/4" (19) or thicker panels are used and a reveal less than 1/4" (6) is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105° stop. You should use the built-in 90° stop to prevent damage. PANEL REQUIREMENTS Door and drawer panels must be a minimum of 5/8" (16) thick. The door panel cannot exceed 40 lbs (18 kg) and each drawer panel must not exceed 12 lbs (5 kg) for 27" (686) wide units. For 36" (914) wide units, the door panel weight limit is 53 lbs (24 kg) and 16 lbs (7 kg) for each drawer panel. 27" (686) WIDE MODELS 54 (1372) * 1 (3) min 8 REVEAL 13 26 16 (681) 13 26 16 (681) * 1 (3) min 8 REVEAL 3 4 (19) PANEL 3 4 (19) PANEL * 1 (3) min 8 REVEAL Panel width dimensions for installation of two 27" (686) wide tall units side by side. 25 (635) 25 (635) CABINETRY OR SIDE PANEL 24 (610) DOOR DOOR TO BACK OF UNIT CABINETRY OR SIDE PANEL Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. SUB-ZERO UNIT SUB-ZERO UNIT *SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL 36" (914) WIDE MODELS 72 (1829) * 1 (3) min 8 REVEAL 13 35 16 (910) 13 35 16 (910) * 1 (3) min 8 REVEAL 3 4 (19) PANEL 3 4 (19) PANEL * 1 (3) min 8 REVEAL Panel width dimensions for installation of two 36" (914) wide tall units side by side. 25 (635) 25 (635) CABINETRY OR SIDE PANEL 24 (610) DOOR DOOR TO BACK OF UNIT CABINETRY OR SIDE PANEL Dimensions are based on a 1/8" (3) reveal. A reveal of up to 1/4" (6) is possible, but panel dimensions need to be adjusted accordingly. SUB-ZERO UNIT SUB-ZERO UNIT *SUBTRACT PANEL WIDTH FROM CABINETRY OPENING TO DETERMINE ACTUAL WIDTH OF REVEAL Dimensions are in inches with millimeters in parentheses unless otherwise specified. 45 INSTALLATION OPTIONS The illustrations show some typical installations and their dimension considerations. The depth dimension in the illustrations may vary depending on cabinet styles, treatment of countertops or other design options. IMPORTANT NOTE: The depth of each Integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635). NOTE: In the Installation Options illustrations, the first width dimension shown is for 27" (686) wide units and the second dimension is for 36" (914) wide units. 25 CABINETS 25 (635) 27 (686) OR 36 (914) ACCESSORIES Optional accessories are available through your Sub-Zero dealer. To obtain local dealer information, visit the Locator section of our website, subzero. com. TOP VIEW Installation without side panels CABINETS DUAL INSTALLATIONS If two or more Integrated models are installed side by side where there is 2" (51) or less of space between the units, a heater kit is recommended--TTDUAL for two tall units installed side by side and BBDUAL for two base units or a base unit and a tall unit installed side by side. These optional components are available through your Sub-Zero dealer. (635) 27 (686) OR 36 (914) 5 MINIMUM 8 (16) SIDE PANELS Installation with side panels CABINETS 25 (635) OR (1829)) (1372))) ) 54 72 TOP VIEW S E R V I C E I N F O R M AT I O N Sub-Zero Freezer Co. , Inc. Box 44130 Madison, WI 53744-4130 Service line: 800-222-7820 Website: subzero. com Installation of two units side by side CABINETS 25 (635) If you need service, you can reach the Sub-Zero service line 24 hours a day, seven days a week, by calling 800-222-7820. [. . . ] The maximum door panel weight is 15 lbs (7 kg). No handle recess is required. F R A M E D PA N E L S P E C I F I C AT I O N S Undercounter Models Framed Door Panel Model 249RP Model 249FF(I) Model 245 Model 249R W 23 5/8" (600) 23 5/8" (600) 23 1/2" (597) 23 5/8" (600) H 30" (762) 30" (762) 28 1/8" (714) 30" (762) O V E R L AY PA N E L S P E C I F I C AT I O N S Models 249RP 249FF(I) and 249R , Overlay Door Panels Overlay Panel Spacer Panel Backer Panel W 24" (610) 23" (584) 23 5/8" (600) H 30 5/16" (770) 29 3/8" (746) 30" (762) PANELS 1/4" (6) THICK OR LESS PANELS THICKER THAN 1/4" (6) Trim reveal 1/4" (6) min Trim reveal 1/4" (6) min Rout to 1/4" (6) thickness OVERLAY PANEL Rear View 1/8" (3) 5/16" (8) 4"(102) 15" (381) H 1/4" (6) Panel 1" W Illus. 3 Notch Required for Hinge Clearance (top and bottom) (25) Illus. 4 80 MODEL 245 ­ LOWER HINGE TOP VIEW 237/8" (606) WIDTH OF UNIT BOTTOM HINGE EXTENDS 1/4" (6) FROM SIDE OF UNIT UP TO 31/2" (89) FROM FLOOR DOOR 233/4" (603) TO BACK OF UNIT The full-scale illustration above shows how the Model 245 lower hinge extends out from the side of the unit in the area of the kickplate. Dimensions in parentheses are in millimeters unless otherwise specified. 81 O V E R L A Y P A N E L S ­ M O D E L S 2 4 9 R P, 2 4 9 F F ( I ) A N D 2 4 9 R 145° MAXIMUM DOOR OPENING Full-scale (top view) 145° DOOR OPENING (TOP VIEW) 24" (610) CABINETRY OPENING *MODEL 249 OVERLAY MUST EXTEND A MINIMUM OF 1-13/16" (46) BEYOND SURFACE OF ADJOINING CABINETRY AND MUST BE 1" (25) FROM ADJACENT CABINETRY TO ALLOW THE MAXIMUM DOOR SWING DOOR CLOSED 1"* (25) 3/4" (19) 113/16" (46) DOOR PANEL DOOR PANEL DOOR OPEN @ 145° 145°* The full-scale illustration shows some installation considerations you need to make, and how the maximum door opening may interact with adjacent cabinets and countertops. 82 Dimensions in parentheses are in millimeters unless otherwise specified. S U B - Z E R O F R E E Z E R C O M PA N Y P R O D U C T S LIMITED WARRANTY RESIDENTIAL USE ONLY FULL FIVE YEAR SEALED SYSTEM WARRANTY LIMITED SIXTH THROUGH TWELFTH YEAR WARRANTY ON THE SEALED SYSTEM FULL TWO YEAR WARRANTY ON TOTAL PRODUCT* FULL FIVE YEAR SEALED SYSTEM WARRANTY For five years from the date of original installation, your Sub-Zero warranty covers all parts and labor to repair or replace any components that prove to be defective in materials or workmanship in the sealed system. [. . . ]