User manual SUB-ZERO W362210

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SUB-ZERO W362210. We hope that this SUB-ZERO W362210 user guide will be useful to you.

Lastmanuals help download the user guide SUB-ZERO W362210.

Download

Manual abstract: user guide SUB-ZERO W362210

Detailed instructions for use are in the User's Guide.

 [. . . ] Model W362210I(R) has a 600 CFM internal blower. Model W362210(R) is sold as a shell only; internal,  in-line and remote blower options are available. 

Wolf Pro wall hoods provide the ultimate in ventilation. With standard elements like heat sentry and dual setting halogen lighting,  Wolf elevates the need for ventilation to an enjoyable perk. This 22" (559) deep model is the low-profile version,  36" (914) wide and available in the classic stainless steel finish.  [. . . ] Installation of all Pro wall hoods should be 30" (762) to 36" (914) from the bottom of the hood to the countertop. Follow the dimensions shown in the Installation illustration. Models W362210I and W362210IR come with a 600 CFM internal blower,  all other lowprofile wall hoods are shipped without the blower assembly. Internal,  in-line and remote blower assemblies are available. Blower options also vary with the volume of air that needs to be moved and the length of the duct run. Refer to the end of this section for Pro ventilation recommendations and blower options. IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower. 

Pro wall hoods require a separate,  grounded 110/120 V AC,  60 Hz power supply. The service should have its own 15 amp circuit breaker. Placement of the electrical supply is not critical,  as long as you provide a minimum of 6" (152) of 120 V AC,  60 Hz power cable. Locate electrical within the shaded area shown in the Installation illustration. Note that the location of the electrical supply will differ between vertical and horizontal discharge blowers. You must follow all National Electrical Code regulations. In addition,  be aware of local codes and ordinances when installing your service. Vertical or horizontal discharge is applicable on the low-profile wall hoods except for Models W362210I and W362210IR with internal blowers have a vertical discharge only. Refer to the installation instructions shipped with each Wolf product for detailed specifications. This information can also be found on our website,  wolfappliance. com. 

Dimensions in parentheses are in millimeters unless otherwise specified. 

5

Planning Information

Models W362210 I (R) and W362210 (R) Pro Wall Hoods

D U C T I N G C O N S I D E R AT I O N S

Models W302210I and W362210I come with internal blowers,  all other Wolf Pro low-profile wall hoods are shipped without the blower assembly. Internal,  in-line or remote blower assemblies are available. The remote blower can be mounted on the roof or an exterior wall. Refer to the illustration below for ducting options. 

Pro low-profile wall hoods have an adjustable discharge location that can run vertically or horizontally. Horizontal discharge is applicable on low-profile wall hoods (excluding Models W302210I and W362210I) using a remote blower.  [. . . ] Ventilation recommendation charts on the following pages provide minimum CFM recommendations according to the cooking appliance and ventilation system used and blower options for each specific ventilation hood or downdraft. 

24 3/8"
(619)

24 7/8"
(632)

11 3/4"
(298)

18"

18 1/2"
(470)

(457)

12"
(305)

4 1/2"
(114)

8"
(203)

211/2" (546)

12 1/4"
(311)

22"
(559)

18"
(457)

In-line BLOWER-60IL

In-line BLOWER-110IL

18" (457) 20 3/4" 28 1/4"
(718) (527)

21" (533) 10" 29 1/2"
(749) (254)

10" 29 1/2"
(749) (254)

10" (254) Diameter 24 1/2"
(622)

10" (254) Diameter 14 3/4"
(375)

10" (254) Diameter 29 1/2"
(749)

15 1/2"
(394)

29 1/2"
(749)

14 3/4"
(375)

14"
(356)

10 1/8"
(257)

10 3/8"
(264)

4 3/4" 24 3/4"
(629) (121)

22"
(559)

7 1/4"
(184)

25"
(635)

7 1/4"
(184)

Remote BLOWER-60REM and BLOWER-90REM Dimensions may vary by ± 1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. 

Remote BLOWER-120REM

Remote BLOWER-150REM

7

Planning Information

Wolf Ventilation Recommendations

P R O V E N T I L AT I O N C F M R E C O M M E N DAT I O N S
Pro Low-Profile Wall Hoods W302210I W362210(I) W422210 DF304 / R304 / SRT304 DF366 / R366 / SRT366 / RT366 DF364 / R364 / SRT364 / RT364 RT362 DF484 / R484 / SRT484 / RT484 R482 / RT482 600 600 900 900 900 900 900 900 900 900 W482210

NOTE: For optimal performance,  a Pro 27" (686) deep wall hood is recommended for use with ranges and rangetops that contain a charbroiler or griddle. Model numbers for dual fuel ranges,  gas ranges,  sealed burner rangetops and gas rangetops indicate width and number of surface burners. Features such as a charbroiler,  griddle and/or French Top will vary.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SUB-ZERO W362210

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SUB-ZERO W362210 will begin.