User manual SUB-ZERO W542718

[. . . ] Pro wall hoods are sold as a shell only; internal, in-line and remote blower options are available. Wolf Pro wall hoods provide the ultimate in ventilation. With standard elements like heat sentry and dual setting halogen lighting, Wolf elevates the need for ventilation to an enjoyable perk. Pro 27" (686) deep wall hoods are available in the classic stainless steel finish. You also have the option of a decorative rail. [. . . ] Follow the dimensions shown in the Installation illustration. Wolf Pro wall hoods are shipped without a blower assembly. Internal, in-line and remote blower assemblies are available. Blower options also vary with the volume of air that needs to be moved and the length of the duct run. Refer to the end of this section for Pro ventilation recommendations and blower options. IMPORTANT NOTE: Install this ventilation hood only with a Wolf blower. Pro wall hoods require a separate, grounded 110/120 V AC, 60 Hz power supply. The service should have its own 15 amp circuit breaker. Placement of the electrical supply is not critical, as long as you provide a minimum of 6" (152) of 120 V AC, 60 Hz power cable. Locate electrical within the shaded area shown in the Installation illustration. Note that the location of the electrical supply will differ between vertical and horizontal discharge blowers. You must follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances when installing your service. Refer to the installation instructions shipped with each Wolf product for detailed specifications. This information can also be found on our website, wolfappliance. com. Dimensions in parentheses are in millimeters unless otherwise specified. 5 Planning Information Model W542718 (R) Pro Wall Hood D U C T I N G C O N S I D E R AT I O N S Wolf Pro 27" (686) deep wall hoods are shipped without the blower assembly. Internal, in-line or remote blower assemblies are available. Pro 27" (686) deep wall hoods have a vertical discharge location as shown in the illustration below. IMPORTANT NOTE: Install these ventilation hoods only with a Wolf blower. Refer to the Pro ventilation charts at the end of this section for recommendations and blower options. DUCTWORK INSTALLATION THROUGH ROOF Ducting considerations for Pro 27" (686) deep wall hoods. ROOF CAP OR REMOTE BLOWER 10" ROUND DUCT SOFFIT OR CABINET OR DUCT COVER TRANSITION 22 1/4"W x 9"D TO 10" ROUND 10"H (INCLUDING FLANGES) VERTICAL DISCHARGE 18" (457) HEIGHT OF HOOD WALL HOOD 27" (686) DEPTH OF HOOD 30" TO 36" (762­914) COUNTERTOP TO BOTTOM OF VENTILATION HOOD 36" (914) STANDARD FLOOR TO COUNTERTOP HEIGHT VERTICAL DISCHARGE ONLY FOR 27" (686) DEEP WALL HOODS. Dimensions in parentheses are in millimeters unless otherwise specified. 6 Planning Information Wolf Ventilation Recommendations WOLF BLOWER ASSEMBLIES A ventilation system must include a blower assembly. With a few exceptions where internal blowers are included, Wolf ventilation hoods and downdrafts are shipped without the blower assembly. An internal, in-line or remote blower assembly must be selected to accommodate the cooking appliance, CFM requirements and homeowner preferences. Internal, in-line and remote blower assemblies are available as sales accessories through your Wolf dealer. [. . . ] Additional CFM may be required for long duct runs. P R O V E N T I L AT I O N B L O W E R O P T I O N S Pro 27" (686) Deep Wall Hoods Blower Description 600 CFM Internal 900 CFM Internal 1200 CFM Internal 600 CFM In-Line 1100 CFM In-Line 600 CFM Remote 900 CFM Remote 1200 CFM Remote 1500 CFM Remote Blower Number WBLOWER-60INT (807614) WBLOWER-90INT (805086) WBLOWER-120INT (804702) BLOWER-60IL (808331) BLOWER-110IL (808332) BLOWER-60REM (801640) BLOWER-90REM (801641) BLOWER-120REM (801642) BLOWER-150REM (804701) Wall Hood Models W302718 / W362718 / W422718 W302718 / W362718 / W422718 W482718 / W542718 / W602718 / W662718 W302718 All 27" (686) Deep Wall Hoods W302718 W302718 / W362718 / W422718 / W482718 / W542718 All 27" (686) Deep Wall Hoods All 27" (686) Deep Wall Hoods Vertical discharge with 10" (254) round duct. Wall hood models without decorative rail listed; blower options are the same for (R) models. Transition with backdraft damper included with all wall hoods. Blower configurations are for reference only. [. . . ]