User manual SUNBEAM STEAM MASTER IRONS

[. . . ] Doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively "JCS") warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. [. . . ] Turn the large Fabric Select Dial to the fabric setting you desire. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface. Note: While the Steam Lever is turned to the (Dry) setting, you may still use the SHOT OF STEAM® or SPRAY MIST® feature, as long as the Fabric Select Dial is set to wool, cotton, or linen. Turn the Fabric Select Dial to the fabric setting you desire. While the iron is heating, make sure it is sitting on its heel rest on a stable, protected surface. IMPORTANT: When not ironing, always set the Steam Lever to (Dry) and the Fabric Select Dial to OFF. You can use this feature while Dry or Steam ironing, as long as the Fabric Select Dial is set to wool, cotton, or linen. the water reservoir must be approximately 1/4 full of water. TO USE THE SHOT OF STEAM® FEATURE: Place the iron on top of the wrinkle and press the Shot of Steam® button each time you would like an extra burst of steam. The Shot of Steam ® feature may be used continuously in approximately 3-second intervals. vERTICAL STEAM (select models only) allows your iron to function as a garment steamer. Tip: When using vertical steam on clothing, hang the clothing on a clothes hanger for best results. Hanging curtains and drapes may also be steamed. Hold the iron in a vertical position, with the iron close to but not touching the fabric you want to steam. With your other hand, pull the fabric tight. Press the Shot of Steam® button in approximately 3-second intervals as you move the iron across the wrinkled area. WARNING: To prevent the risk of burns, keep your hand away from the area being steamed. WARNING: DO NOT steam garments while wearing them; this may result in injuries. The Auto-Off will activate in any position after the 30 minutes. Once the Auto-Off activates, the power indicator light will turn off and the iron stops heating. tO RESTART THE IRON: Press the Restart Button (Power Indicator Light). If you do NOT want to iron any longer, unplug the iron. [. . . ] WARNING: NEVER yank the power cord when unplugging the iron. Turn off iron following instructions above. If you do not use your iron on a daily basis, empty the water reservoir after each use for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the fill hole cover, and allow water to flow from the fill hole. [. . . ]