User manual SUUNTO ELEMENTUM AQUA

[. . . ] · Suunto Elementum Aqua switches automatically to dive mode when it is in contact with water and reaches a depth more than 0. 6 m. In dive mode, Suunto Elementum Aqua starts recording your dive time when it reaches a depth more than 1. 2 m. · When surfacing, Suunto Elementum Aqua saves dive information into memory and starts showing surface time. MEMORY 1. In time mode, rotate [A] to enter memory. [. . . ] When the button lock is activated, only the backlight works. To open the button lock, press [A] and [B] at the same time. 2. 4 Activating backlight The backlight can be activated in both modes. Keep [B] pressed to activate the backlight. In DIVE mode you can activate the backlight by pressing [A] or [B] once. The backlight stays activated for 5 s. 8 en NOTE: If you want to use the backlight in MEMORY or SETTINGS, activate it before entering them. NOTE: Heavy use of the backlight significantly reduces battery life. 9 3 DIVING WITH SUUNTO ELEMENTUM AQUA 3. 1 Before diving Before diving, check that: time and date are correctly set (if you have been traveling between different time zones). the battery level is not too low (see Section 4. 1 Battery replacement). the device displays the correct units of measurement (metric/imperial). 3. 2 Starting a dive Suunto Elementum Aqua switches into DIVE mode when it is in contact with water and reaches depth more than 0. 6 m. The symbol on the display indicates water contact. After you reach depth more than 1. 2 m, Suunto Elementum Aqua automatically starts recording your dive time. 10 3. 3 During diving During diving (depth more than 1. 2 m), the following information is displayed: dive time (first row) current depth (second row) maximum depth of the dive (bottom row) water temperature (outer rim) en 3. 4 Between dives When you reach depth less than 1. 2 m, the device saves the dive information (log) into MEMORY and starts to count surface time. In DIVE mode after the surface time counter has started, the following information is displayed: dive time of the last dive (first row) current depth when your depth is between 1. 2 m - 0. 3 m OR surface time when your depth is 0. 3 m or less (second row) maximum depth of the last dive (bottom row) Surface time is the time spent on surface between dives. Based on the time you have been on the surface, you can calculate how long you have to wait to safely dive again (until nitrogen has left your body). 11 NOTE: The minimum time for a dive log is 15 s: shorter logs are not saved. When MEMORY is full, a new log replaces the oldest log. NOTE: The maximum surface time shown in the counter is 48 hours. After that, the counter is reset in addition to the dive time and max. The surface time is not saved into the memory of the device. 3. 5 Viewing diving logs To view your diving logs: 1. In TIME mode, rotate [A] to enter MEMORY. Rotate [A] downwards to browse the logs from latest to oldest. Rotate [A] upwards to browse the logs from oldest to latest. Press [B] to exit MEMORY. 12 en The information on your diving logs is stored into MEMORY. Each log has its own memory slot that is shown as a segment on the outer rim on the display. [. . . ] These documents can be required for the access to Suunto warranty service. 20 Please access and review the online help resources available at www. suunto. com or referred to in the Product manual before seeking warranty service. If a claim under this Limited Warranty appears to be necessary, please return your wristop computer either through Suunto Service Request available at www. suunto. com or contact your local authorized Suunto retailer. For all other Products covered by this Limited Warranty, contact your local authorized Suunto retailer ­ for contact information please visit the Suunto website www. suunto. com or call the Suunto Help Desk +358 2 284 1160 (national or premium rates may apply) for further details and instructions how to bring your Product for Warranty Service. Please, use prepaid fright, when shipping your Product to your local authorized Suunto retailer. en Other important notices Please remember to take backup copies of all important content and data stored in your Product because content and data may be lost during repair or replacement of the Product. [. . . ]