User manual SWEEX SP003V2 QUICK_START_GUIDE

[. . . ] Englishversion SP003V2/SP003UKV2 Sweex 5. 1 Subwoofer System 300 Watt Introduction First of all, many thanks for purchasing this Sweex 5. 1 Subwoofer System 300 Watt. This speaker set enables you to enjoy high-quality sound and the most realistic (surround) effects during films and/or games. [. . . ] · Protect the speaker set against powerful shocks or jolts ­ they may damage the internal electronics and/or the speakers itself. · Never attempt to open the speaker set yourself ­ it will cause the warranty to lapse. Contentsofthebox Prior to using the Sweex 5. 1 Subwoofer System 300 Watt, check if all required parts are present. The following parts must be present in the box: · 5. 1 Subwoofer System o 1 x Subwoofer o 4 x Satellite speaker o 1 x Centre speaker · Audio cable, 9-pin DIN to 3 x 3. 5 mm · CD-ROM with manual If one of the above parts is missing, please contact the retail outlet where you purchased the device. Englishversion Specifications · · · · · · · · · · · · · · · · · Maximum power satellite speakers: 1. 5 Watt RMS Maximum power woofer: 10 Watt RMS Maximum power centre: 2 Watt RMS Magnetically shielded Built-in stereo amplifier 4 x 2. 5" satellite speaker 1 x 3" woofer speaker 1 x 2. 5" centre speaker Volume and bass controls Plug and Play Built-in power supply Input: 9-pin DIN 5. 1 audio Output: Plug (RCA) Frequency range satellite: 120 Hz ­ 20 KHz Frequency range woofer: 50 Hz ­ 140 Hz Frequency range centre: 120 Hz ­ 20 KHz Supports: Windows 98SE, 2000 and XP Installationofhardware First connect the centre and satellite speakers to the woofer. The two upright speakers with the red connection are FR: "front right" (short wire) and RR: "right surround" (long wire). The two upright speakers with the white connection are FL: "front left" (short wire) and RL: "left surround" (long wire). The flat "centre" speaker also has a white connection and must be connected to CEN. Englishversion Subsequently, the woofer must be connected to the sound source. Note the connection in the woofer: this is a so-called 9-pin DIN connection, which can be fitted in only one way (check the notch in the plug). When connecting to the (5. 1) sound source, note the colour codes of the audio cable. The 3. 5mm green/orange/black audio plug must be connected to the corresponding colours of the outputs at the sound source. In the event that the sound source does not show any colours, or e. g. , when you use a 7. 1 sound source, you can use the diagram below in order to find the right connection: 3. 5 mm audio colour Green Orange Black Type of sound FR "front right" and FL "front left" CEN "centre" and the woofer RR "right surround" and RL "left surround" Colour of sound source Green Orange Black Plug into the mains and switch on the woofer by pressing the `POWER' button at the front. [. . . ] If one of the above parts is missing, please contact the retail outlet where you purchased the device. The rightful owner has and retains title to all brand names and related rights mentioned in this manual. [. . . ]