User manual SWEEX TV020

[. . . ] TV020 Full HD LCD TV 22" Contents 1 PREFACE 3 2 SAFETY PRECAUTIONS 3 3 IN THE CARTON 5 4 FRONT&BACK CONNECTIONS OF LCD 6 Power Cord Connection Antennas Connection SCART Connection 5 INSTALLTION DRAWINGS 7 7 8 8 9 9 10 YPbPr Connection S-Video Connection VGA(PC) Connection HDMI Connection Remote control instructions in TV mode Remote control instructions in TELETEXT mode 6 REMOTE CONTROL 11 12 13 14 Remote control instructions in DVD mode Remote control setup First Time Installation TV Information VIDEO menu options 7 TV OPERATION 15 16 17 18 18 22 22 Audio menu options Setup menu options Timer menu options Function menu options 1 Basic operation MP3/JPEG Playback Function Settings 8 DVD OPERATION 24 24 25 25 25 28 29 30 DVD Function General setup System Setup Language Setup Audio Setup Digital Setup 9 TROUBLESHOOTING AND ADVICE 31 10 SPECIFICATIONS 32 2 1 . Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do no install it and contact your dealer. [. . . ] Delete Program Press / button and then use / to select whether to delete all the programs. Program Search Press / button and then use / to select whether to start searching the programs. After setting the items, select OK to finish the first time installation, or select Cancel to exit this menu. If you cancelled the first time installation, it will remind you whether to set the first time installation next time. Yes Do it next time No 15 TV Information Program Information Press DISPLAY or NICAM button to display the program information. 1. The colour system of current program, could be selected in Manual Tuning menu(an option of SETUP menu). The label of current program, you can label it in Manual Tuning menu(an option of SETUP menu). The sound system of current program, could be selected in Manual Tuning menu(an option of SETUP menu). If the icon of NICAM mode is red, it means the current program supplies multi NICAM signals, and you can select it by pressing NICAM button. The NICAM modes and relative icons: 16 VIDEO menu options Press MENU button on the front panel or TV MENU on the remote control to display the main menu. 1. Press / button to select PICTURE in the main menu. Press / button to select the option that you want to adjust in the PICTURE menu. When you are satisfied with your adjustment, press the TV MENU button to return to the previous menu or press the EXIT button to exit the main menu. Picture Mode Select Picture Mode in PICTURE menu. (Available picture mode: Standard, Personal, Movie, Sport, Mild, Game. ) If you change the value of Contrast, Brightness, Colour, Tint , Sharpness or Colour temperature on the picture menu, the picture mode will be changed to "Personal" automatically. You may select the picture mode directly by pressing PMODE button. TIPS: You can press PMODE button on the remote control to select the Picture Mode directly. Contrast Press / button and then use / to adjust the contrast of the picture. After adjust the value you want, press TV MENU button to return to the preview MENU. Brightness Press / button and then use / to adjust the brightness of the picture. Colour Press / button and then use / to adjust the colour saturation. NOTE: This option is invalid in PC mode, and it will be shown in gray. Tint Press / button and then use / to adjust the tone of colour when your system is in NTSC. Sharpness Press / to select the sharpness mode of your TV. Auto tuning This option allows you to tune the channels that can be received automatically. Note: Before you perform Auto Tuning, you must choose the country where you are by selecting COUNTRY option. Press Enter Key to Start. Press ENTER key to start. You can press TV MENU button to stop auto tuning and close the OSD menu. Manual Tuning This option allows you to perform Manual Tuning. Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option in the FUNCTION menu. [. . . ] If on, the screen background will turn blue at very weak or no signal condition. Child Lock Press ENTER or button to set the child lock. PIN Code: Delete 0~9 Input ENTER Enter You need to enter the PIN code if the Child lock is set "on", and the default PIN code is empty, you can press ENTER button directly to enter. TIPS:The superuser's(administrator's)password is 8329. Child Lock Press ENTER or button to set the child lock. Key Lock Press ENTER or button to set the key lock. [. . . ]