User manual SWEEX TV022 QUICK_START_GUIDE

[. . . ] Contents 3 1 PREFACE 2 SAFETY PRECAUTIONS 3 3 IN THE CARTON 5 4 FRONT&BACK CONNECTIONS OF LCD 6 5 INSTALLTION DRAWINGS Power Cord Connection Antennas Connection SCART Connection YPbPr Connection S-Video Connection VGA Connection HDMI Connection 7 7 8 8 9 9 10 6 REMOTE CONTROL Remote control instructions in TV mode Remote control instructions in TELETEXT mode Remote control instructions in DVD mode Remote control setup 11 12 13 14 7 ACCESSORIES 14 8 TV OPERATION First Time Installation TV Information VIDEO menu options Audio menu options Setup menu options Timer menu options Function menu options 15 16 17 18 18 22 22 1 9 DVD OPERATION Basic operation MP3/JPEG Playback Function Settings DVD Function General setup System Setup Language Setup Audio Setup Digital Setup 24 24 25 25 25 28 29 30 10 TROUBLESHOOTING AND ADVICE 31 2 1. Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do no install your dealer. [. . . ] You may select the picture mode directly by pressing PMODE button. TIPS: You can press PMODE button on the remote control to select the Picture Mode directly. Contrast Press / button and then use/to adjust the contrast of the picture. After adjust the value you want, press TV MENU button to return to the preview MENU. Brightness Press / button and then use / to adjust the brightness of the picture. Colour Press / button and then use / to adjust the colour saturation. NOTE: This option is invalid in PC mode, and it will be shown in gray. Tint Press / button and then use / to adjust the tone of colour when your system is in NTSC. Sharpness Press / to select the sharpness mode of your TV. (Available Sharpness Mode: Normal, Sharp, Sharpest, Softest, Soft. ) Colour temperature Select an optimum colour temperature mode to suit your eyes for viewing among Normal, Warm and Cold. NOTE: This option is available only in PC mode. Note: Before you perform Manual Tuning, you must choose the country where you are by selecting Country option in the FUNCTION menu. Press / to select Manual tuning in SETUP menu. Press / to perform your selection, the menu of Manual tuning will display on the screen. Program The current program number. Press / to select the upper or lower program. Sound System Press / to select a corresponding sound system, such as DK, L/L', BG, I. 19 Colour System Press / to select a corresponding colour system, such as Auto, PAL, SECAM. ProgramLabel This option allows you to label a channel, you can also relabel the programs have been labeled. Press/ select Program Label in SETUP menu. The menu of program label will display as below: 4. 6. Press the numeric buttons to input the numbers directly or press / to select the letters. Press ENTER, TV MENU or EXIT button to confirm and return to previous menu. AFT (Auto Fine Tune) Due to weak signals or a wrong antenna configuration, some of the channels may not be tuned to the best reception condition. AFT function allows you to fine tune channel selected(the frequency of channel is around the value in Manual Search option. Manual Search This option has two functions: 1. [. . . ] For media with 4:3 contents, using any mode would only display a 4:3 screen Screen ratio selection should be according to the connected TV / Display aspect ratio. PASSWORD The default setting is locked. No Rating selection or change password could be done. To edit the Rating setting, please enter default password "0000" using the numeric buttons, then press ENTER button to confirm. To change password, input any 4 digit number when the lock is unlocked. [. . . ]