User manual SWITEL WTC 519

[. . . ] Rechargeable battery pack Caution: Never throw batteries into a fire. Incorrect polarity of the batteries represents a risk of explosion during charging. Medical equipment Caution: Never use the walkie−talkies in the vicinity of medical equipment. effects on such equipment cannot be fully ruled out. [. . . ] Therefore, slight deviations in the appearance of the symbols on the walkie−talkie buttons compared to those depicted here are possible. Handset 1 2 3 4 5 6 7 8 9 10 Display Headset connection socket Power adapter cable socket On / Off 12 Menu Increase setting Microphone 11 Loudspeaker Decrease setting 10 Transmit ringing tones 9 11 PTT − Talk button 12 Antenna 1 2 3 4 5 6 7 8 Display 1 2 3 4 5 6 7 8 50 Channel search VOX mode Channel Receiving Transmitting Key lock Volume control Battery capacity 1 2 3 4 5 6 8 7 Operating the Walkie−Talkies 4 Operating the Walkie−Talkies Display and notation of operating sequences P 2 sec M 2xM a, P b, P ON ð Press the button displayed Press the button depicted for 2 seconds Press the button displayed twice Press and hold the button displayed Release the button displayed Text in the display Speak into the microphone Display illumination The display lights up for 4 seconds after pressing any button, except the P button. Switching the walkie−talkie on/off 23 aV Switch the walkie−talkie on An acoustic signal is issued. The current channel setting appears in the display. AV Switch the walkie−talkie off Volume control + or , Raise or lower the volume Transmitting and receiving Transmitting 24 aPð Transmit Hold the walkie−talkie approx. 5 to 7 cm from your mouth and speak at a normal volume. In order to talk to other subscribers, the respective walkie−talkies must be set to the same channel. Receiving 25 b, P Receive Radio signals cannot be received when the P button is being pressed. 51 Operating the Walkie−Talkies Confirmation signal (Roger beep) The confirmation signal is issued on releasing the P button. This signals to the caller that you have ended transmission. 09375 Searching for a channel Signals are searched for in the eight channels in a continuous cycle. If an active channel is detected, the channel search stops. press the P button to enable radio communication. Starting channel search 3 sec + or , Start the channel search Resume the channel search End the channel search Resuming search for a channel + or , Stopping channel search P 52 Operating the Walkie−Talkies Transmit ringing tone The ringing tones indicate to other subscribers that you want to talk to them. A condition for this is that the other subscribers are using the same channel. C Send the ringing tone Monitor function The Monitor function enables the search for weak signals on the channel currently set. If you receive an external signal, switch to a free channel. Always communicate with other subscribers on a free channel to prevent interference. M and + Start monitoring the channel M End the monitoring function Key lock The key lock function prevents inadvertent modification of settings. When the key lock function is activated, the − icon appears in the display. Activating 26 M and , Activate the key lock function Deactivate the key lock function Deactivating 27 M and , 53 Operating the Walkie−Talkies VOX mode (handsfree) When this function is active, the walkie−talkie automatically starts to transmit when the unit detects a voice or a sound. When you start to speak, there is a slight delay before the walkie−talkie starts to transmit. [. . . ] All deficiencies related to material or manufacturing errors within the period of guarantee will be redressed free of charge. Rights to claims under the terms of guarantee are annulled following tampering by the purchaser or third parties. Damage caused as the result of improper handling or operation, normal wear and tear, incorrect positioning or storage, improper connection or installation or Acts of God and other external influences are excluded from the terms of guarantee. In the case of complaints, we reserve the right to repair defect parts, replace them or replace the entire device. [. . . ]