User manual SYLVANIA 2820LV

[. . . ] The communications protocol is "DALI", an acronym for "Digital Addressable Lighting Interface". This is a worldwide standard for digital lighting control that has been accepted by all the leading lighting suppliers. [. . . ] SYSTEM 32 DALI controls OCTRON T8 lamps over a wide (100-1%) range of light level settings, from 1. 0 ballast factor to . 01 ballast factor. Control wiring is simplified by two polarity-free connections that can be routed in the same raceway as power wires. SYSTEM 32 DALI is available in one and two lamp models that operate at 120V or 277V input line voltage, eliminating "wrong voltage" wiring errors and reducing the number of models in inventory by half. 2820LV SYSTEM 32 DALI offers full rated lamp output (1. 0 ballast factor) at the maximum light setting. Compared to "normal" systems (0. 88 ballast factor), this allows for higher light levels when desired and can be used to compensate for lamp lumen depreciation. Setting the standard for quality, SYSTEM 32 DALI is also covered by our QUICK 60+® warranty, the first and most comprehensive system warranty in the industry. System Information Programmed rapid start ballasts provide optimum starting conditions to provide up to 100, 000 switching cycles for use on occupancy sensor and building control system applications. Individual addressability allows the user to dim any particular fixture or groups of fixtures at one time. of Lamps 1 2 Ballast Factor (BF) 1. 00 0. 01 1. 00 0. 01 System Lumens 3000 30 6000 60 Description QTP 1x32T8/UNV DALI QTP 2x32T8/UNV DALI BEF1 2. 78 1. 43 Specifications Starting Method: Programmed Rapid Start Circuit Type: Series Lamp Frequency: >40kHz Lamp CCF: <1. 7 Starting Temp: 50°F (10°C) min. Input Frequency: 50/60 Hz THD: <10% @ full output Power Factor: >98% @ full output Voltage Range: ±10% of 120/277 rated voltage UL Listed Class P, Indoor cUL Certified Temp. Test Point (Tc) on ballast label: 1 lamp model: 65°C max 2 lamp model: 70°C max. All other points on ballast: 75°C max. FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62. 41 Cat. A Transient Protection No Remote or Tandem Wiring 1: Ballast Efficiency Factor (BEF) = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value). Wiring Diagrams: Wiring: Push-in (wiretrap) connections Use 18 AWG solid copper wire only LAMP Green White Black Purple Purple G N L 1 2 3 4 DALI DIMMING BALLAST Red Red Blue Blue 2820LV DALI Control Leads (non-polarized) Class 1 or Class 2 Circuit QTP1x32T8/UNV DALI LAMP 2 LAMP 1 Green White Black Purple Purple G N L 1 2 3 4 5 6 DALI DIMMING BALLAST Red Red Yellow Yellow Blue Blue DALI Control Leads (non-polarized) Class 1 or Class 2 Circuit Control Information QUICKTRONIC DALI ballasts are compatible with DALI digital controllers available from various manufacturers. [. . . ] FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62. 41 Cat. A Transient Protection No Remote or Tandem Wiring 1: Ballast Efficiency Factor (BEF) = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value). Wiring Diagrams: Wiring: Push-in (wiretrap) connections Use 18 AWG solid copper wire only LAMP Green White Black Purple Purple G N L 1 2 3 4 DALI DIMMING BALLAST Red Red Blue Blue 2820LV DALI Control Leads (non-polarized) Class 1 or Class 2 Circuit QTP1x32T8/UNV DALI LAMP 2 LAMP 1 Green White Black Purple Purple G N L 1 2 3 4 5 6 DALI DIMMING BALLAST Red Red Yellow Yellow Blue Blue DALI Control Leads (non-polarized) Class 1 or Class 2 Circuit Control Information QUICKTRONIC DALI ballasts are compatible with DALI digital controllers available from various manufacturers. [. . . ]