User manual SYLVANIA 3909LC

[. . . ] One lamp fixtures can now be used in place of two lamp models. SYSTEM PHO-DIM is appropriate for lighting control for aesthetic reasons as well as lighting management for energy conservation through daylight harvesting or building automation. [. . . ] SYSTEM PHO-DIM is appropriate for lighting control for aesthetic reasons as well as lighting management for energy conservation through daylight harvesting or building automation. Setting the standard for quality, SYSTEM PHO-DIM is also covered by our QUICK 60+ warranty, the first and most comprehensive system warranty in the industry. <10% THD Electronic T5HO Fluorescent Controllable Lighting Systems Normal Ballast Factor QT54 PHO DIM Key System Features · 100-1% Dimming range · QUICKSENSE® ballast technology (end-of-lamp-life sensing) · PROStart® programmed rapid start ballast · QUICK 60+® warranty · 1-10V Control · Anti-flash circuitry ­ turns on in dimmed mode · High luminous efficacy · Virtually eliminates lamp flicker · High power factor · Low harmonic distortion · Lightweight · UL, CSA, FCC SYSTEM PHO-DIM is available in one and two lamp models in 120V and 277V to cover a wide range of applications. System Information QT2x54PHO-DIM PROStart ballasts provide optimum starting conditions to provide up to 100, 000 switching cycles for use on occupancy sensors and building control systems. QUICKSENSE ballast technology helps to protect against over-heated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamp-life sensing, over the entire dimming range, to avoid false shutdowns caused by some static sensing methods. QUICKSENSE ballast technology will auto-reset when the end-of-life lamps are replaced with new ones. SYSTEM PHO-DIM comes in a 30 x 30 mm profile, and PENTRON lamps are designed to provide peak performance at 35°C fixture ambient, allowing for smaller and more innovative fixtures. May be wired as Class 1 or Class 2 circuit. QUICKTRONIC HELIOSTM ballasts are compatible with a wide range of 0-10V controllers available from various manufacturers. A list of controls companies are on pages 90-91. Class 1 or Class 2 Circuit QUICKTRONIC 2x54PHO-DIM A list of compatible controllers and wiring examples are on pages 90 & 91. Dimensions: Overall: 425mm L x 30mm W x 30mm H Mounting: 415 mm Wiring: Push-in connectors Use 18AWG solid copper wire only Product Weight: Quantity: 20 pcs. /case (no leads provided) 500 pcs/pallet pack (with leads/wires) Weight: 1. 0 lbs ea. (approx) Mounting Length Length Height System Life / Warranty QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. For additional details, refer to our QUICK 60+ warranty bulletin. [. . . ] A list of controls companies are on pages 90-91. Class 1 or Class 2 Circuit QUICKTRONIC 2x54PHO-DIM A list of compatible controllers and wiring examples are on pages 90 & 91. Dimensions: Overall: 425mm L x 30mm W x 30mm H Mounting: 415 mm Wiring: Push-in connectors Use 18AWG solid copper wire only Product Weight: Quantity: 20 pcs. /case (no leads provided) 500 pcs/pallet pack (with leads/wires) Weight: 1. 0 lbs ea. (approx) Mounting Length Length Height System Life / Warranty QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. [. . . ]