User manual SYLVANIA 3913LCV

[. . . ] The system includes SYLVANIA's new line of QUICKSTEP stepped switching ballasts. QUICKSTEP ballasts are specially designed to meet California Energy Commission's Title 24 requirements for multi-level lighting controls (Section 131). [. . . ] QUICKSTEP ballasts are specially designed to meet California Energy Commission's Title 24 requirements for multi-level lighting controls (Section 131). The combined lamp and ballast system offers high performance features that are standard on SYLVANIA's Professional Series of ballasts. QUICKTRONIC T5HO ballasts contain QUICKSENSE ballast technology, a patented circuitry designed to shut down the system reliably and safely when lamps reach end-of-life. <10% THD Electronic T5HO Fluorescent Programmed Rapid Start Systems 0. 80BF Professional and QUICKSTEP® Series QS BI-LEVEL & 3913LCV Key System Features · QUICKSTEP Stepped Switching bi-level dimming · Universal voltage (120-277V) · QUICKSENSE® ballast technology (end-of-lamp-life sensing) · PROStart programmed rapid start · Operates at >40 kHz to reduce potential interference with infrared control systems · High power factor (>98%) · <10% THD total harmonic distortion at full power · UL, CSA, FCC · Small can enclosure Setting the standard for quality, PENTRON Systems are also covered by our QUICK 60+® warranty, the first and most comprehensive system warranty in the industry. QUICKTRONIC 0. 80BF T5HO is available as a two-lamp model in either a Professional or QUICKSTEP version, to cover a wide range of applications. System Information QUICKTRONIC 0. 80BF T5HO Systems operate from 120V through 277V, 50 or 60Hz, eliminating "wrong voltage" wiring errors and reducing the number of models in inventory by half. The QUICKSTEP system has two AC line inputs in addition to the neutral wire. These AC line inputs must be connected to the same phase of the line voltage. QUICKTRONIC® T5HO 0. 80BF and QUICKSTEP ballasts are also compatible with other lamp manufacturers equivalent lamp types that meet ANSI standards. 0. 80BF T5HO Systems and QUICKSTEP® (Bi-Level) T5HO Dimming Systems (120-277V) Input Current (AMPS) Rated1 Ballast 1 Input 1 System 1 1 Lumens No. of Factor System Mean Power Efficacy (lm) Lamps (BF) Lumens Lumens (W) (lm/W) BEF2 Item Number Description Lamp Type QTP Fixed Output BF0. 80 49418 QTP 2x54T5HO/UNV PS80SC 0. 80/0. 34 FP54T5HO 5000 2 0. 80 8000 7440 96/93 83/86 0. 86 QUICKSTEP Bi-Level Switchable Model 49419 QS 2x54T5HO/UNV PS80SC 0. 80/0. 34 FP54T5HO 5000 0. 44/0. 19 FP54T5HO 5000 2 2 0. 80 0. 40 8000 4000 7440 3720 96/93 52/51 83/86 77/78 0. 86 0. 78 1: At 35°C lamp ambient temperature. 2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Power (Note: calculation based on lowest wattage value). Specifications Data based on FP54T5HO Starting Method: Programmed Rapid Start Circuit Type: Series Lamp Frequency: >40 kHz Lamp CCF: Less than 1. 7 Starting Temp: 50°F (10°C) minimum Input Frequency: 50/60 Hz Low THD: <10% (Full power) <20% THD (@50% power) Power Factor: >98% (Full power) Voltage Range: ±10% of Rated Input UL Listed Class P, Type 1, Outdoor, CSA Certified 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A+ Sound Rating ANSI C62. 41 Cat. A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting (Max. wire length from ballast case to lampholder): up to 10 feet Installation Notes · Install in accordance with National & Local Electric Code · Ground ballast case · For QUICKSTEP ballasts, the AC line inputs must be connected to the same phase of the line voltage · DO NOT CONNECT two separate phases of line voltage to the input of QUICKSTEP ballasts, the ballast will be damaged and not covered by warranty NEW! QS BI-LEVEL & 3913LCV Lamp 2 Lamp 2 Lamp 1 Lamp 1 Yellow Red Yellow S1 S2 Black Black Red Electronic Ballast Black Blue White Electronic Ballast Blue White 2-Lamp QTP Fixed output only 2-Lamp QS (QUICKSTEP) Full light output (full power) S1 & S2 closed (on) Bi-level mode S1 or S2 open (off) Dimensions: Small Can (SC) enclosure size: Overall: 9. 5" L x 1. 68" W x 1. 18" H Mounting: 8. 90" Wiring: Leads only Packaging: Quantity: 10 pcs Weight: 1. 6 lbs each (approx) System Life / Warranty Height Mounting Length Length QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. [. . . ] A Transient Protection Dynamic End-of-Lamp-Life Sensing Remote Mounting (Max. wire length from ballast case to lampholder): up to 10 feet Installation Notes · Install in accordance with National & Local Electric Code · Ground ballast case · For QUICKSTEP ballasts, the AC line inputs must be connected to the same phase of the line voltage · DO NOT CONNECT two separate phases of line voltage to the input of QUICKSTEP ballasts, the ballast will be damaged and not covered by warranty NEW! QS BI-LEVEL & 3913LCV Lamp 2 Lamp 2 Lamp 1 Lamp 1 Yellow Red Yellow S1 S2 Black Black Red Electronic Ballast Black Blue White Electronic Ballast Blue White 2-Lamp QTP Fixed output only 2-Lamp QS (QUICKSTEP) Full light output (full power) S1 & S2 closed (on) Bi-level mode S1 or S2 open (off) Dimensions: Small Can (SC) enclosure size: Overall: 9. 5" L x 1. 68" W x 1. 18" H Mounting: 8. 90" Wiring: Leads only Packaging: Quantity: 10 pcs Weight: 1. 6 lbs each (approx) System Life / Warranty Height Mounting Length Length QUICKTRONIC products are covered by our QUICK 60+® warranty, a comprehensive lamp and ballast system warranty. [. . . ]