User manual SYLVANIA 4WLTR19G

[. . . ] SYSTEM DL40 is available in a one lamp, two lamp and a three lamp model. All are Universal Voltage (120-277V) models. [. . . ] SYSTEM DL40 provides over 30% more lumen output than 34T12 systems at nearly the same power input. Also, the small lamp diameter and sleek profile provide new design options and improved fixture optics. <10% THD Electronic TT5 Fluorescent Ballast Systems Key System Features · High Efficiency Systems over 90% efficient · Universal voltage (120-277V) · QUICKSENSE® ballast technology (end-of-lamp-life sensing) · Min. Starting Temp: · 0°F (-18°C) for FT40DL and FT40DL/SS · High luminous efficacy · Virtually eliminates lamp flicker · Quiet operation · High power factor · Low harmonic distortion · Lightweight · UL, CSA · Auto Reset SYSTEM DL40 ballasts contain QUICKSENSE ballast technology, a patented circuitry designed to shut down the system reliably and safely when the lamps have reached their end-of-life. Setting the standard for quality, SYSTEM DL40 is also covered by our QUICK 60+® warranty, the first and most comprehensive system warranty in the industry. System Information SYSTEM DL40 uses instant start operation to provide the highest system efficacy and to assure low temperature starting capability. Instant start also provides for maximum remote wiring distances. QUICKSENSE ballast technology helps to protect against overheated bases and sockets, as well as cracking of the glass wall, and uses dynamic end-of-lamp-life sensing to avoid false shutdowns caused by some static sensing methods. 1: Ballast factor based upon 225mA nominal lamp current for FT40DL lamp and 190mA nominal lamp current for FT40DL/28W/SS lamp. 2: Ballast Efficiency Factor (BEF) shown = (Ballast Factor x 100) divided by Input Wattage (Note: calculation based on lowest input wattage). Specifications Data based on FT40T5 Starting Method: Instant Start Ballast Factor: 0. 90 Circuit Type: Parallel Lamp Frequency: >40kHz Lamp CCF: Less than 1. 7 Starting Temp:3 0°F (-18°C) for FT40DL and for FT40DL/SS Input Frequency: 60 Hz Low THD: <10% Power Factor: >98% Voltage Range: ±10% of 120-277V rated line (108-305V) UL Listed Class P, Type 1 Outdoor CSA Certified 70°C Max Case Temperature FCC 47CFR Part 18 Non-Consumer Class A Sound Rating ANSI C62. 41 Cat. A Transient Protection Remote Mounting (Max. wire length from ballast case to lampholder): up to 18 feet 3 Operation below 50°F (10°C) may affect light output or lamp operation ­ see "Low Temp. Starting" definition. Black White Red Blue BALLAST QUICKTRONIC® 1x40DL/UNV ISN-SC Black White Red BALLAST Blue Blue Black White Red Blue Blue Blue BALLAST QUICKTRONIC QHE blue lead. [. . . ] Starting" definition. Black White Red Blue BALLAST QUICKTRONIC® 1x40DL/UNV ISN-SC Black White Red BALLAST Blue Blue Black White Red Blue Blue Blue BALLAST QUICKTRONIC QHE blue lead. Note: For one lamp application, cap any 2x40DL/UNV ISN-SC ® QUICKTRONIC 2x40DL Note: For two lamp application, cap any blue lead. [. . . ]