User manual SYLVANIA 6220VA

[. . . ] Industry's Most Adaptable Dimming Ballast: ballasts feature micro-controller technology for compatibility with: · low voltage controls · power line dimmers · any line voltage from 120V to 277V 3. Unmatched Performance: patented lamp detection technology that virtually eliminates variations in brightness from lamp-to-lamp and provides uniform lighting throughout the dimming range. [. . . ] At light levels of >75% unnecessary lamp-coil power is turned off, delivering energy efficiences comparable to nondimming Instant start electronic ballast. This technology also eases installation and troubleshooting by recognizing failed lamps, faulty wiring or loose Electronic T8 Fluorescent Controllable Lighting Systems Key System Features · Industry's first ballast that combines dimming inputs from 0-10V and/or two-wire AC dimming providing maximum flexibility. · POWERSENSE compatibility with low voltage and power line dimmers · High Efficiency · NEMA Premium Ballast compliant · Lamp Detection Technology · Universal voltage (120-277V) · 100 - 5% Dimming Range · PROStart Programmed Rapid Start · Anti-flash circuitry - turns on in dimmed mode · Lightweight and low profile · Operates at >42kHz · QUICK 60+ ballast and lamp warranty connections, and shutting down. When the problem is corrected, the system restarts automatically. NEMA Premium Ballast (NPB) program compliant. The NPB program promotes the use of high efficiency T8 electronic ballasts by meeting or exceeding the Ballast Efficiency Factors, (BEF) established by the CEE, (Consortium for Energy Efficiency). For additional information on this program go to: www. cee1. org or www. nema. org Setting the standard for quality, QUICKTRONIC POWERSENSE is covered by our QUICK 60+® warranty, the first and most comprehensive lamp & ballast system warranty in the industry. System Information QUICKTRONIC POWERSENSE ballasts operate from standard low voltage (0-10VDC) fluorescent controllers or compatible 2-wire power line fluorescent dimmers, making them ideal for individual office lighting or automated building applications, both in new construction and retrofit projects. Take care to connect lamp lead wires as shown on the applicable ballast diagram. Control Information QUICKTRONIC POWERSENSE ballasts are compatible with a wide range of low voltage (0-10VDC) and power line fluorescent controllers available from various manufacturers. Please see controls list and dimming control wiring examples on page 86 & 87 or contact OSRAM SYLVANIA. Low Voltage Control Specs: Ballast will source up to 0. 5mA for 0-10VDC control purposes. May be wired as a Class 1 or Class 2 circuitconsult Local and National Electrical Codes. Power Line Control Specs: Specificationgrade fluorescent controls are available for 120V or 277V operation of controllable analog electronic fluorescent ballasts. Controls must be suitably rated for both the type (e. g. Fluorescent Phasecontrol) and size (e. g. [. . . ] Controls must be suitably rated for both the type (e. g. Fluorescent Phasecontrol) and size (e. g. [. . . ]