User manual SYLVANIA 6220VB

[. . . ] Compatibility with low voltage controls, power line dimmers and any line voltage from 120V to 277V, provides the flexibility to greatly simplify the specification, purchasing and installation process. Patented lamp detection technology delivers unmatched performance. [. . . ] Variations in brightness from lamp-tolamp are virtually eliminated, providing uniform lighting throughout the dimming range. At light levels of >75% unnecessary lamp-coil power is turned off, delivering energy efficiences comparable to non-dimming Instant start electronic ballast. This technology also eases installation and troubleshooting by recognizing failed lamps, faulty wiring or loose Electronic T5 Fluorescent Controllable Lighting Systems Key System Features · Industry's first ballast that combines dimming inputs from 0-10V and/or two-wire AC dimming providing maximum flexibility · POWERSENSE compatibility with low voltage and power line dimmers · High Efficiency · Lamp Detection Technology · Universal voltage (120-277V) · 100-1% Dimming Range · PROStart programmed rapid start · Anti-flash circuitry ­ turns on in dimmed mode · Lightweight and low profile · Operates at >42kHz · QUICKSENSE ballast technology (end-of-lamp-life sensing) · QUICK 60+ ballast and lamp warranty connections, and shutting down. When the problem is corrected, the system restarts automatically. All SYLVANIA Professional Series (QTP) electronic ballasts feature high power quality (<10% THD), lightweight, low profile designs. Setting the standard for quality, QUICKTRONIC POWERSENSE is covered by our QUICK 60+® warranty, the first and most comprehensive lamp & ballast system warranty in the industry. System Information QUICKTRONIC POWERSENSE ballasts operate from standard low voltage (0-10VDC) fluorescent controllers or compatible 2-wire power line fluorescent dimmers, making them ideal for individual office lighting or automated building applications, both in new construction and retrofit projects. For the individual office or conference room, installation can be streamlined by using a 2-wire power line dimmer; eliminating the need for additional control wires. Low Voltage Control Specs: Ballast will source up to 0. 5mA for 0-10VDC control purposes. May be wired as a Class 1 or Class 2 circuit-consult Local and National Electrical Codes. Power Line Control Specs: Specification-grade fluorescent controls are available for 120V or 277V operation of controllable analog electronic fluorescent ballasts. Controls must be suitably rated for both the type (e. g. Fluorescent Phase-control) and size (e. g. 600W) of the connected load. Width Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from other manufacturers dimming ballasts. [. . . ] Fluorescent Phase-control) and size (e. g. 600W) of the connected load. Width Output Wiring: Lamp wiring for dimming ballasts can differ significantly from non-dimming ballasts and from other manufacturers dimming ballasts. [. . . ]