User manual SYLVANIA D3913CLC

[. . . ] Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched. High Speed HDMI Cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Cables used in this connection are as follows: · Cables used in this connection are as follows: · For more info, please contact 1-800-968-3429 or visit : http://www. The model and serial numbers of this unit may be found on the cabinet. [. . . ] Set "Still Mode" setting to "Field" in "Video" menu if pictures in the slow forward playback mode are blurred. The repeat setting will be canceled when you stop playback. The chapter, title, track or group repeat will be cleared when moving to another chapter, title, track / file or folder. Repeat playback does not function during A-B repeat playback. Chapter and title repeat are not available with some scenes. You can play back the specific part (between point A and point B) repeatedly. As soon as you set the point B, the part between point A and point B will start playback repeatedly. Press [GREEN] to go to the next page in the track / file list. For JPEG files, use [K / L] to select a folder, then press [ENTER] first, and then use [K / L] to select a file, then press [ENTER]. Use [K / L] to select "All Clear" at the bottom of the list to erase all the tracks / files in the program. Use [s / B] to go back/forward between the hierarchy of folders. Press [GREEN] to go to the next page in the track / file list. 2 Use [K / L] to select your desired item, then During the random playback, press [STOP C] once to set the resume point, and then press [PLAY B] to resume random playback from where [STOP C] was pressed (audio CD) or from beginning of the file where [STOP C] was pressed (JPEG). To repeat the current track / file in the random selection, press [REPEAT] repeatedly until " Track" appears during playback. To repeat the entire random selection press [REPEAT] repeatedly until " All" appears during playback. Playback from a desired track / file is not available during random playback. You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. "1" : Executes 3D noise reduction which detects and deletes the noise by comparing each picture frames. "2" : Executes MPEG noise reduction which reduces the block noise and mosquito noise on the subtitle on movie. "3" : Executes both MPEG noise reduction and 3D noise reduction. Some BD-video have the PIP function which enables you to display the secondary video in the primary video. You can call up the secondary video by pressing [PIP] whenever the scene contains the secondary video. [. . . ] If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn the unit to the standby mode, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center. cleaning the cabinet · Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth. [. . . ]