User manual SYLVANIA DV220SL8

[. . . ] If you need additional operating assistance after reading this owner's manual, please call From the unit from TV The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. [. . . ] ⷠIndicator on this unit flashes if there are no more timer recordings on standby. ⷠIf auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the DVD functions are available during one-touch timer recording, timer standby mode and timer recording. ⷠPress [STOP/EJECT C A] on this unit or [T-SET] on the remote control to use the VCR when the unit is turned off. ⷠPress [OUTPUT] on this unit or [VCR ] on the remote control to use the VCR when the unit is turned on. In case timer recording is in standby mode, press [STOP/EJECT C A] on this unit or [T-SET] on the remote control, and then press [OUTPUT] on this unit or [VCR ] on the remote control. If you want to use the DVD player during a timer recording or while ] on the remote control to choose DVD mode, then continue with the other DVD If there is a power failure or the unit is unplugged for more than 30 seconds, clock setting and all timer programs will be lost. You can set the unit to start recording whenever it detects a video signal from the external tuner. Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read any signals from the cable/satellite box. ) · The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/video signals when it comes to the time you want to finish recording. Make sure to turn off the tuner when you finish setting. If you wish to go back to the left, press [s ]. Indicator on this unit lights up and the unit goes to the DVD mode. If you do not use DVD function, turn off the unit. ⷠSatellite unit must be turned on for VCR satellite link to start. If cable/satellite box is not set to output signals, satellite link will remain in standby mode. To cancel the satellite link function while the satellite link recording is in progress: Press [STOP/EJECT C A] on this unit. The hour can be selected from 1-12 with AM or PM. ⷠWhen the external tuner signal is stopped, recording will be stopped. If you have not set the clock, "CLOCK SET" menu will appear at step 2. [. . . ] This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States. This product is produced for home use and this warranty only covers failures due to defects in material or workmanship which occurs during normal use. [. . . ]