User manual SYLVANIA LC32SS9A

[. . . ] The model and serial numbers of this unit may be found on the cabinet. You should record and retain those numbers for future reference. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the apparatus's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] â· When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. "Audio only program" message will appear on the TV screen, when you receive only sound signal. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel. â· If no signal is detected or protected signal is received during still mode, the image remains paused and the sound output will be muted. To cancel still mode, press any button except [POWER]. When all audio are available When stereo and monaural audio are available You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit. When SAP and monaural audio are available Language and the number of available languages. To use the video or S-video input jack of VIDEO1 on the unit, select "Video1". â· To use the video or S-video input jack of VIDEO2 on the unit, select "Video2". â· To use the component video input jacks of COMPONENT1 on the unit, select "Component1". â· To use the component video input jacks of COMPONENT2 on the unit, select "Component2". â· To use the HDMI1 input jack on the unit, select "HDMI1". â· To use the HDMI2 input jack on the unit, select "HDMI2". â· To use the PC input jack on the unit, select "PC". "Other" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. You can display the currently selected channel or other information such as the audio mode on the TV screen. In the analog mode, the current channel number and the audio mode are displayed. The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen. ) 4 channel number 5 audio language (Refer to "Switching Audio Mode" on page 17. A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. Department stores and supermarket were When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll. [. . . ] If the infrared light appears through the camera, the remote control is working. Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the power cord. Should your unit become inoperative, do not try to correct the problem yourself. [. . . ]