User manual SYMPHONIC 19TR

[. . . ] CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. LOCATION: INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. [. . . ] To use the DVD/VCR again as usual, press the TIMER SET button to disable the flashing TIMER SET light, then press the VCR/TV button to select the VCR position. Press the VCR button to choose VCR or DVD mode, then continue with the other features as described in this manual. ¡When timer recordings are set, the TIMER SET light will come on. To use the DVD/VCR as usual until the time for the recording, press the TIMER SET button so that the TIMER SET light disappears. Press the VCR/TV button to choose the VCR position. Press the VCR button to choose VCR or DVD modes, then continue with the other features as described in this manual. If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, set the DVD/VCR to channel 3 or 4 i. e. the same channel as the CH3 or CH4 switch on the back of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. Leave the cable box or satellite box on for timer recording. If you want to use the DVD player during a VCR timer recording or while the TIMER SET light is on or flashes. ¡You can use the DVD player while the TIMER SET 7) Set the tape speed Press the PLAY button or the STOP button repeatedly for the desired tape speed. Then, press the F. FWD button. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /13 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL 16 REC SPEED SP SP SLP light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD/VCR. ¡You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the playing VCR. TO MONITOR THE RECORDING 1 Turn on the TV and set the TV to channel 3 or 4. ¡Now set the CH3/CH4 switch on the back of the DVD /VCR to match the channel selected on the TV. 2 Press the VCR/TV button on the recording VCR so that the VCR/TV Light comes on. MTS (Multi-Channel Television Sound) SYSTEM VCR When you play a VHS tape, or receive a broadcast on the DVD/VCR tuner channel you are watching, the current status will appear when you press the DISPLAY button on the 1)* remote control. When you record a MTS broadcast signal, you need to 2)* set it to MTS mode. STOP 12:00AM CH 32 STEREO SAP SP 0:00:00 HIFI Coaxial cable (supplied) [TV set] (Use for monitoring) Audio/Video cables (not supplied) LEFT RIGHT OUT IN VIDEO AUDIO ANT in [Playing VCR] (another source) 1)* When a program is broadcast in stereo, STEREO appears. When a program is broadcast in second audio, SAP appears. ¡Although a program may be broadcast in both stereo 1 Insert a pre-recorded tape into the playing VCR. 2 Insert a tape with a safety tab into the recording VCR. and sub audio, you must select the Recording mode to TV STEREO or SAP before you record a broadcast. 2)* While the VCR is set in HiFi stereo mode, HiFi appears on the TV screen. While the VCR is set in monaural (MONO) mode, HiFi disappears from the TV screen. ¡If you play non-HiFi tapes while the VCR is set in 3 Press the SPEED button on the recording VCR to select the desired recording speed (SP/SLP). ¡When you use the A/V input jacks on the back of the HiFi, HiFi will disappear from the TV screen and the VCR will automatically play in monaural. DVD/VCR, select "L1" position by pressing [0], [0], [1] on the remote control or the CHANNEL buttons (o/p). ¡When you use the A/V input jacks on the front of the MTS RECORDING/MONITOR MODE DVD/VCR, select "L2" position by pressing [0], [0], [2] Display on the STEREO/SAP Type of Hi-Fi audio track Normal audio TV screen broadcast Selection (2-channel) track on the remote control or the CHANNEL buttons (o/p). L-channel R-channel Regular -None-InvalidNote (monaural audio) Mono Mono Mono "L1" and "L2" are found before the lowest memoStereo STEREO -InvalidL L+R R broadcast rized channel. [. . . ] Luego, presione [F. FWD]. ­ 46 ­ SP 1L25 PREPARACIÓN DE RELOJ VCR Ajuste el reloj con precisión para grabación con temporizador automática adecuada. Le sugerimos que usted utilice un TV o estación de radio como su fuente de tiempos. REPRODUCCIÓN DE UN DISCO REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO DVD Para empezar Conecte la alimentación del TV, amplificador y cualquier otro componente que se encuentre conectado al DVD/VCR. (Cambie el sistema de entrada para que se adapte DVD/VCR y compruebe que el volumen de sonido sea correcto). CD 1 Presione [MENU] dos veces para llamar el menú principal. (Si usted ha ajustado ya el reloj, usted sólo tiene que presionarlo una vez). [. . . ]