User manual SYMPHONIC 7100

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The caution marking is located on the rear of the cabinet. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] In this case, refer to "TITLE MENU". 2 If the feature is not available, may appear on the TV screen. symbol 3 If disc menu is available on the disc, audio language, subtitle options, chapters for the title and other options will appear for selection. 4 Press Arrow (K/L/s/B) to select an item and ENTER to confirm selection. 5 Press STOP to stop playback. NOTES: ¡When the DVD mode has been switched to the TV mode, the DVD mode shuts down first and then the TV picture and sound appears in about 4 seconds. Similarly, when POWER is pressed to turn off in the DVD mode, this mode shuts down first and then the unit's power is turned off. ¡A "prohibited icon" may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc. ¡With DVDs that use titles for playback program signals, playback may start from the second title or it may skip these titles. ¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction. TITLE MENU DVD-V 1 Press TITLE on the remote control. 2 If the feature is not available, may appear on the TV screen. symbol 3 Press Arrow (K/L/s/B) to select an item and ENTER to confirm selection. CALLING UP A MENU SCREEN DURING PLAYBACK ¡Press DISC MENU to call up the DVD menu. ¡Press TITLE to call up the title menu. NOTE: ¡Contents of menus and corresponding menu opera- tions may vary between discs. Refer to the manual accompanying the disc for details. EN 0C28 ­ 20 ­ RESUME DVD-V CD MP3 FAST FORWARD/REVERSE SEARCH DVD-V CD MP3 1 During playback, press FWD g or REV h. For example, " 0 : 0 - : - -" appears in the Time Search display if the total time of the disc is less than 10 minutes. Using SEARCH MODE 1 Press SEARCH MODE. ¡The Track search display appears. MARKER SETUP SCREEN DVD-V CD 2 Within 30 seconds, select a desired track number using the number buttons. ¡For single digits press 0 first, if the total track of the Use markers to memorize your favorite places on a disc. disc is more than 10 tracks. ¡Playback will start at the selected track. 1 Press SEARCH MODE four times (CD: three times) during playback. ¡The display screen and Markers will appear on the Using SKIP H G During playback, press SKIP G to move the next track. Press it repeatedly to skip subsequent tracks. Press SKIP H to go back to beginning of the current track. Press it repeatedly to go to the previous tracks. ¡If SKIP is pressed while the playback is paused, the playback will be paused again after skipping to the next track. NOTE: ¡SKIP H G are not available when playback is stopped. TV screen. 2 Press Arrow (s/ B) to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that "- - - - : - - : - -" appears in the display. 3 When you reach the desired point, press ENTER. ¡The title or track and elapsed playing time will appear in the TV screen. TITLE / CHAPTER SEARCH DVD-V 1 Press SEARCH MODE once for the Chapter search, twice for the Title search during playback. _ /2 4 To return to the Marker later, press SEARCH MODE four times (CD: three times) during playback and Arrow (s/ B) to choose the desired marker, then press ENTER. NOTES: ¡Opening the disc tray or turning off the power or 2 Enter the desired chapter/title number using the number buttons. ¡Playback will start at the selected chapter or title. ¡Press CLEAR to erase the incorrect input. [. . . ] A continuación, pulse el botón ENTER. 2 Pulse el botón OPEN/CLOSE. ¡La bandeja de carga del disco se abrirá. 3 Ponga el dlsco en la bandeja con el lado de la eliguta hacia arriba. ­ AJUSTE DE CANAL ­ 2 Empiece el prefijado automático AGREGAR/BORRAR (CATV) Pulse el botón K o L para señalar "AUTOPROGRAMACION DE CA". A continuación, pulse el botón ENTER. El sintonizador busca y memoriza todos los canales activos en su localidad. B AUTOPROGRAMACION DE CA. 3 Después de buscar 4 Pulse el botón PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. [. . . ]