User manual SYMPHONIC STL1504

[. . . ] FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION : Owner's Manual FEATURES LCD TELEVISION PARTS : LABOR : FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are not covered under this warranty. [. . . ] Press to select or adjust from a particular menu. (for example: Language Selection, Channel Presetting, Closed Caption Selection, Picture Adjustment or V-CHIP Set Up) 3. CHANNEL (CH) / buttons- Press to select memorized channel. Press to select the setting mode from the menu on the TV screen. Press to select item you want to adjust in the picture control mode. 17 USING AUDIO/VIDEO INPUT JACKS 15. S-VIDEO input jack- Connect to the S-VIDEO output jack of a video camera or VCR using the S-VIDEO cable (not supplied). Note: The S-VIDEO jack is given priority over the VIDEO jack. in jack- Connect to an antenna, cable system or satellite system. HEADPHONE jack- Connect headphone (not supplied) for personal listening. Note: Do not connect earphones that have an L-shaped plug. The plug may interfere with the cabinet. When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by pressing the INPUT SELECT button on the remote control or the SELECT button on the front panel on the TV. · To use the jacks of AV-IN1 on the TV, select "VIDEO1". · To use the jacks of AV-IN2 on the TV, select "VIDEO2". Note: · When you use the S-VIDEO connection, S-VIDEO jack is given priority over the VIDEO jack. TV MENU 11 INPUT SELECT DISPLAY 2 5 8 0 1 4 7 VOL CH PREPARATION FOR USE LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the procedure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) or button to point to "LANGUAGE". 5) Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS] by using the VOL(ume) n or m button. 6) Press the MENU button to exit the menu. - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. [. . . ] If outside antenna is being used, check for broken wire. Turn off with POWER button and then turn it on after about a minute. Move the TV away from the nearby appliances which have Magnetism. Turn off using the POWER button, then turn it on again 30 minutes or so later. [. . . ]