User manual SYMPHONIC SVX1000

[. . . ] THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. IMPORTANT SAFEGUARDS 1. Read instructions-All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions-The safety and operating instructions should be retained for future reference. 3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions-All operating and use instructions should be followed. [. . . ] NOTE The initial setting is "STEREO". · · This setting is saved even if the unit is turned off or the AC cord is unplugged. TO CHECK THE SOUND STATUS 1 Press [SETUP] then press [K] or [L] to point to "CAPTION". - TV SET UP - By pressing [DISPLAY], the status shown below will appear on the display when you receive a broadcast on the unit tuner channel you are watching. CH 123 STEREO/SAP SETUP CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [OFF] BACK LIGHT [BRIGHT] 3) 2) 1) 2 Press [ENTER] repeatedly to select the desired caption menu "CAPTION1", "CAPTION2", "TEXT1" or "TEXT2". - TV SET UP CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] B CAPTION [CAPTION1] BACK LIGHT [BRIGHT] ENTER · If you select "OFF", Closed Caption System setting is canceled. SETUP 1) When a program is broadcast in stereo, "STEREO" appears on the TV screen. 2) When a program is broadcast in second audio, "SAP" appears on the TV screen. 3) When a program broadcast both in stereo and second audio, "STEREO/SAP" appears on the TV screen. 3 Press [SETUP] to exit the menu. - 14 - EN 1 4 7 SLEEP 2 5 8 0 SKIP 3 CH. A VOL. TV RATING SET UP 6 9 +100 Follow steps 1 to 3 in the V-CHIP SET UP. 4 Press [K] or [L] to select the desired TV ratTV OPERATION AND SETTINGS TV SECTION ing to be blocked then press [ENTER] repeatedly to set "BLOCK" or "VIEW". B TV­Y TV­Y7 ( TV­G TV­PG ( TV­14 ( TV­MA ( ) ) ) ) [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] [VIEW] +10 ZOOM MUTE PLAY REV STOP SLOW DISC MENU FWD ENTER PAUSE DISPLAY ENTER SETUP TITLE RETURN · Shaded buttons are used for following operation. V-CHIP SET UP V-CHIP SET UP This feature enables parents to prevent their children from watching inappropriate material on TV. When you try to access a program which is blocked, "PROTECTED PROGRAM by . . . " message appears on the TV screen. Selection TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Rating Category Explanations Appropriate for all children Appropriate for children seven and older General Audience Parental Guidance suggested. Unsuitable for children under 14 Mature audience only NOTE When you select a rating and set it to · "BLOCK", the higher ratings will be blocked automatically. The lower ratings will be available for viewing. TV­Y TV­Y7 ( ) B TV­G TV­PG (DLSV ) TV­14 (DLSV ) TV­MA ( LSV ) [VIEW] [VIEW] [BLOCK] [BLOCK] [BLOCK] [BLOCK] 1 Press [SETUP] then press [K] or [L] to point to "V-CHIP SET UP". - TV SET UP - SETUP CHANNEL SET UP B V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] BACK LIGHT [BRIGHT] · When you set the lowest rating to "VIEW", all other ratings will automatically be available for viewing. 2 Press [ENTER] then press the Number Buttons to enter the access code. ACCESS CODE 5 When you select the ratings of TV-Y7, TV-PG, 2 5 8 0 3 6 9 ENTER ____ 1 4 7 · For the first time set-up or in the event the unit has lost power, enter the default code of 0000. TV-14 or TV-MA you will have the option of setting sub rating categories. Press [K] or [L] to select a rating with subratings you wish to block, then press [ENTER] twice. Press [K] or [L] to select a sub-rating, then press [ENTER] to set it to "BLOCK" or "VIEW". Selection Rating Category Explanations TV-Y7 FV Fantasy Violence TV-PG, TV-14, TV-MA D Suggestive Dialog (TV-PG, TV-14 only) L Coarse Language S Sexual Situation V Violence NOTE 3 Press [K] or [L] to select "TV RATING", "MPAA RATING" or "CHANGE CODE" then press [ENTER]. ­ V-CHIP SET UP ­ B TV RATING MPAA RATING CHANGE CODE ENTER TV RATING: See A TV RATING SET UP MPAA RATING: See B MPAA RATING SET UP CHANGE CODE: See C CHANGE ACCESS CODE - 15 - · The blocked sub-ratings will appear next to the rating category in the "TV RATING" menu. EN 6 Press [SETUP] to exit the menu. SETUP · Make sure you enter exactly the same new code in the "CONFIRM CODE" space as one in the "NEW CODE" space. Even if they are played back, the sound or video quality will be compromised. *7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc. ). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder. *8: Only the discs recorded in the video format and finalized can be played back. Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc. ). *9: If there is too much recording space left on a disc (the used portion is less than 2-3/16" (55mm) across), it may not play back properly. *10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly. [. . . ] There are no user-serviceable parts inside. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center. · Always store the disc in its protective case when it is not used. IF THE LASER OPTICAL PICKUP UNIT IS DIRTY · If the unit still does not perform properly when it is operated, while referring to the relevant sections and to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. · · · · · To clean-off, use a soft cloth. Do not use a hard cloth since this will mar the disc. [. . . ]