User manual SYMPHONIC TVCR19F1

[. . . ] will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. Owner's Manual FEATURES COLOR TELEVISION 6413TE (13 inch) TVCR19F1 (19 inch) LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. [. . . ] The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30, . . 90, 0 minutes) 15 14. GAME button- Press to set the Game mode and external input mode at the same time. Press the GAME button again to exit the mode. IN jack- Connect to an antenna, cable system, or satellite system. 16. AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Remove the AC cord from the hook to avoid breaking a wire before you connect to a standard AC outlet. - REMOTE CONTROL - POWER GAME SLEEP DISPLAY 7 1 2 5 8 0 3 6 9 +100 CHANNEL RETURN 14 13 12 11 9 4 7 6 5 MENU VOL CH VOL CH MUTE 10 4 1. VIDEO (in) jack- Connect to the video output jack of a video camera or VCR. AUDIO (in) jack- Connect to the audio output jack of a video camera or VCR. EARPHONE jack- To connect earphone (not supplied) for personal listening. NOTE: Do not connect earphones that have an L-shaped plug. The plug may interfere with the cabinet. G When AUTO PRESET CH action is completed, the lowest memorized channel reappears on the screen. G When you press the CH(annel) L or M button after selecting AUTO PRESET CH, the tuner will stop at the memorized channels only. G The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions. G When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of the channel scanning. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) L or M button to point to "CHANNEL SET". 3) Press the VOL(ume) L button so that "ADD/DELETE" is selected. 4) Use the CH(annel) L or M button to select the channel you wish to put into memory or to erase from memory. Note: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. [. . . ] It could save your time and money. Poor Reception on Some Channels Different color marks on screen Remote Control Doesn't Work MAINTENANCE CABINET CLEANING G Wipe the front panel and other exterior surLines or Streaks in Picture SUPPLIED ACCESSORIES Remote control unit (N0132UD or N0108UD) Batteries ("AA" x 2) Rod Antenna [13" model only supplied 19" model not supplied] (0EMN00673 or 0EMN01599) Owner's Manual (OEMN02332) Owner's Manual Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST No Picture or Sound Bars On Screen Picture Blurred Weak Picture No Color faces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Do not spray insecticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces. PROBLEM PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord. POSSIBLE REMEDY Try a new channel, if OK, then possible station trouble. [. . . ]