User manual SYMPHONIC WF203

[. . . ] FUNAI CORPORATION LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: LABOR: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. [. . . ] The shut off time can be determined by the number of times you press the button. (0, 10, 20, 30, . . 90, 0 minutes) 14. GAME button- Press to set the Game mode and external input mode at the same time. (See USING AUDIO/VIDEO INPUT JACKS and PICTURE ADJUSTMENT. ) 15. ANT(enna). IN jack- Connect to an antenna, cable system, or satellite system. 16. AC cord- Connect to a standard AC outlet (120V/60Hz). NOTE: Unwrap the AC cord completely from the backcover before plugging the cord into an AC outlet. INSTALLING THE BATTERIES 1) Slide the battery compartment cover back on the remote unit. 2) Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ / -) markings. Batteries installed with incorrect polarity may damage the remote unit. 3) Replace the cover. USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks, select "VIDEO1" or "VIDEO2" mode by pressing the INPUT SELECT button on the remote control. · To use the jacks on the back of the TV, select "VIDEO1". · To use the jacks on the front of the TV, select "VIDEO2". NOTES: · You may also select Game mode and Video2 at the same time by pressing the GAME button on the remote control. "GAME" appears on the TV screen. The TV will switch to Video2 input on the front of the TV. (See PICTURE ADJUSTMENT. ) PREPARATION FOR USE LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the procedure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. 2) Press the POWER button to turn on the TV. 3) Press the MENU button so that the menu display appears on the TV screen. 4) Press the CH(annel) v or w button to point to "[ENGLISH]". 5) Select "ENGLISH" or "ESPAÑOL" = Spanish by using the VOL(ume) v or w button. 6) Press the MENU button to exit the menu. PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN] 3) Press the VOL(ume) v button so that "ADD/DELETE" is selected. [. . . ] It could save you time and money. Poor Reception on Some Channels Different color marks on screen Remote Control Doesn't Work MAINTENANCE CABINET CLEANING q PICTURE TUBE CLEANING Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord. Lines or Streaks in Picture Sound OK, Picture Poor Picture OK, Sound Poor Picture Rolls Vertically No Picture or Sound Ghosts in picture Picture Distorted QUICK SERVICE CHECK LIST q Bars On Screen POSSIBLE REMEDY Picture Blurred Weak Picture No Color Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry. Such chemicals may cause damage and discoloration to the exposed surfaces. PROBLEM Try a new channel, if OK, then possible station trouble. Is antenna connected to terminal on the back of the set? [. . . ]