User manual SYNQ AUDIO RESEARCH LED CROSSFIRE V1.0
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SYNQ AUDIO RESEARCH LED CROSSFIRE. We hope that this SYNQ AUDIO RESEARCH LED CROSSFIRE user guide will be useful to you.
Lastmanuals help download the user guide SYNQ AUDIO RESEARCH LED CROSSFIRE.
Manual abstract: user guide SYNQ AUDIO RESEARCH LED CROSSFIREV1.0
Detailed instructions for use are in the User's Guide.
[. . . ] Ceci peut endommager l'intérieur de l'appareil ou même causer un incendie !stel de lens nooit bloot aan direct zonlicht, zelfs gedurende een korte periode. Dit kan het toestel beschadigen en zelfs brand veroorzaken!Setzen sie die Linse niemals direkter Sonneneinstrahlung aus, auch nicht für eine kurze Zeit ! [. . . ] Press the ENTER button, the display starts blinking. Use DOWN and UP buttons to change the DMX512 address. Once the correct address shows on the display, press the ENTER button to save it. To go back to the main menu without any change press the MENU button shortly. If you want to go back to normal running mode: press the MENU button for about 2 seconds. Channel mode Used to set the desired channel setup mode. Press the MENU button until "Channel mode" is shown on the display. Press the ENTER button, the display starts blinking. Use DOWN and UP buttons to choose 1Chan, 12Chan, 10Chan, 2Chan or 4MSL mode. Once the desired channel setup mode shows on the display, press the ENTER button to save it. To go back to the main menu without any change press the MENU button shortly. Press the MENU button until "Show Mode" is showing on the display. Press the ENTER button, the display starts blinking. Use DOWN and UP buttons to select one of the available shows: Line: select this option when the unit is used in standalone or in a master/slave setup with several units placed in one line, one next to the other. You will be asked the amount of units that are linked in master/slave: set the number of linked units, including the master. You will be asked which preprogrammed show you want to use: choose from 1-1 to 1-8. (Note that this setting is only relevant while used without any controller, you can change the speed using the menu buttons on the master) You will be asked which playback speed you want for the show: choose from 0 to 255. Press the ENTER button, the display starts blinking. Use DOWN and UP button to select a value between "0" (very low sensitivity) and "100" (high sensitivity). Once the mode is selected, press the ENTER button save it. To go back to the main menu without any change press the MENU button shortly. If you want to go back to normal running mode: press the MENU button for about 2 seconds.
Blackout Mode Blackout mode: when no DMX-signal is detected, the unit goes in blackout and waits for a DMXsignal. [. . . ] Pin layout XLR-3pin: Pin1 = GND ~ Pin2 = Negative signal
(-) ~ Pin3 = Positive signal (+) Pin layout XLR-5pin: Pin1 = GND ~ Pin2 = Negative signal (-) ~ Pin3 = Positive signal (+) ~ Pins4+5 not used.
To prevent strange behavior of the light effects, due to interferences, you must use a 90 to 120 terminator at the end of the chain. Never use Y-splitter cables, this simply won't work! Make sure that all units are connected to the mains. Each light effect in the chain needs to have its proper starting address so it knows which commands from the controller it has to decode. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SYNQ AUDIO RESEARCH LED CROSSFIRE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SYNQ AUDIO RESEARCH LED CROSSFIRE will begin.
