User manual T-FAL CLIPSO

[. . . ] Pressure Cooker Clipso Clipso Vitamin Clipso Control User's manual Important safeguards · · · · · · · · · · · · · · · · · · Take the time to read all the instructions and refer to the "User's Guide". As with any cooking appliance, supervise cooking closely if using the pressure cooker with children nearby. Do not put your pressure cooker into the oven. When the pressure cooker is under pressure, take great care when moving it. [. . . ] s Place the steam/vitamin basket on the integrated basket supports (designed for steaming). Turn the selector so that it is on . Put the pressure cooker on the heat source at the highest temperature. Turn the pressure cooker so that the unlocking button is facing you. ! For Clipso Control pressure cooker, set the timer for 15 minutes (see chapter on Smart Timer). The pressure indicator moves up after a few minutes. For Clipso Control and Clipso Vitamin (model with air release system), air and steam release can be heard for a short period of time (see chapter on Air Release System). s s When steam starts to release from the outlet, lower the heat source and time for 15 minutes. For all models 7 s s s After 15 minutes, turn off the heat. Gradually position the programme selector to . When no more steam escapes from the steam outlet and the pressure indicator is down, open the pressure cooker. For Clipso Control, make sure you now remove the timer from its holder. Rinse out the pressure cooker under water and dry it. Clean the basket with warm water and washing up liquid. s s s s Note: the appearance of marks/stains on the interior base of the pressure cooker does not alter the quality of the metal. To remove these, use a scouring pad and some diluted vinegar. 15 Before cooking Before each use, check that the control module is correctly fastened (retaining nut is tightened); you can use a coin if necessary. s Before each use, check that the operation valve inside the lid can move freely. s Set the programme selector to the position indicated in your recipe. s If you have a Clipso Control, set the timer for the required cooking time. s Put the pressure cooker on the heat source at the highest temperature. s Turn the pressure cooker so that the unlocking button is facing you. It is normal to see steam release from the pressure indicator before steam is released from the steam outlet. Condensation may also appear in this area as well. s As soon as the pressure indicator has risen, you cannot open the pressure cooker. s With Clipso Control model, it is normal to hear air and steam release for a while (from a few seconds to a few minutes). s ! If the pressure indicator does not rise: 8 This is perfectly normal for the first few minutes of operation. If the problem persists, and the pin has not risen, check that: The heat source is on the highest setting. There is sufficient enough liquid in the pressure cooker. [. . . ] s Watch the position of the pressure indicator. It should be down in normal position in order to open the lid. Over Pressure Security s During operation, if the steam release becomes blocked, the over pressure security devices come into action: s First device, the safety valve releases the pressure and the steam escapes from under the control module. s Second device, steam flows from between the lid and the pot. If one of these security devices is set off: Turn off the heat source. [. . . ]