User manual TALLYGENICOM 9045N

[. . . ] User Guide TallyGenicom 9045N Laser Printer Jul 07 ii 45 PPM Laser Printer User Guide Trademarks The following are trademarks or registered trademarks of their respective owners. Registered trademarks are registered in the United States Patent and Trademark Office; some trademarks may also be registered in other countries. TallyGenicom, is a registered trademark of TallyGenicom. PostScript is a trademark of Adobe Systems, Incorporated. [. . . ] You access the collating feature through the drivers that support this feature. Before these features can be used, the hard drive option has to be enabled in driver Device Settings. To access the Collating feature on your desktop, go to the Start menu, left click on Settings, left click on Printers, and then click on your printer driver icon, right click and follow the menu to the Properties menu. Use the following procedure to enable collating. Scroll down and make sure a Hard Disk option or User Flash is installed. A Hard Disk must be installed to use the Collating Feature. Press the Printing Properties button printer icon. Click on the Printing Preferences button. Click on the Paper Quality button and then the Advanced button. Click on the Copy Count button to enter the number of copies and make sure the Collate button is checked. Click to OK button and your printer driver is set to collate the number of copies specified. Jul 07 45 PPM Laser Printer User Guide 3-13 Saved Jobs Feature Saved Jobs Feature You can create saved jobs using the drivers that support this feature. The drivers that support this feature are as follows: PCL ­ Windows 2000 and Windows XP Microsoft PostScript ­ Windows 2000 and Windows XP There are three job types available, Normal, Saved, and Private. The descriptions of the job types are as follows: Normal A normal print job. No print job data is saved. Saved The print job data is saved on the Hard Disk or User Flash Option. The job will be saved in the "Job Library" folder. A sub-folder in the Job Library folder will be created, if necessary, for the user, as specified by the user name. The print job will be stored in a file in this folder with a name created by the user in the job name field of the printer driver. Private The print job data is saved on the Hard Disk or User Flash Option. The job will be saved in the "Job Library" folder. A sub-folder will be created, or the by the user as specified by user name. The print job will be stored in a file in this folder, with a name specified by user in the job name field of the printer driver. "Private" print job files are secured by having an associated PIN which is entered in the PIN field of the driver by the user. Any access to this file will require the PIN to be entered. [. . . ] While holding up the rear tray, remove the right and left tabs from the holes at the back of the printer. Jul 07 6-26 45 PPM Laser Printer User Guide Rear tray 3. Push down the lever as shown in the diagram. Jul 07 Appendix A Jul 07 Specifications In this Chapter . . "Specifications" on page A-2 "RS232 Serial Interface Signals" on page A-4 A-2 45 PPM Laser Printer User Guide Specifications Installation Environment 1. Level and stable location (not tilted more than 5·) 2. [. . . ]