User manual TALLYGENICOM MOBILE IMPACT PRINTER 480

[. . . ] Mobile Impact Printer 480 User's Manual GEK-04006 GEK-04006 FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Canadian Compliance Statement This digital apparatus is in conformity with standard NMB-003 of Canada. Cet appareil numérique est conforme à la norme NMB-003 du Canada. Radio and Television Interference When installed at a certain location, the machine may cause interference with radio and television reception. If you notice flickering or distorted images or noises on your audio-visual units, your machine maybe causing radio interference. [. . . ] Loading Position yy Note) "yy" is New adjustment value 4. Exit the Top Adjustment mode Turn the printer off to exit the Top Adjustment mode. 4-26 Using Set-Up Mode Setting of The First Dot Position on The Left Side Function Print positions often change gradually when you use the printer over long periods of time. This ADJUST function allows you to adjust these positions by fine-tuning the Left Margin origin. To enter Adjustment Function: 1) Make sure that the tractors are loaded with continuous feedpaper and that the paper select lever is set forward. 3) Turn the printer back on while pressing the "READY/CLEAR" + "ALT" + "LOAD/FF " buttons. Note: Do not press any buttons alone or in combination except for pressing the "READY/CLEAR" + "ALT" + "LOAD/FF" buttons alone when turning the printer on, to avoid initiating unexpected tests not permitted for the user. 2. To set Adjustment value: 1) The format of adjustment of setting of the first dot Position on the left side is printed as below, 15 patterns of adjustment Position are printed. 01H 02H 03H 04H 05H 06H 07H 08H 09H 10H 11H 12H 13H 14H 10/60 15H 1st Print Position xx 4-27 Using Set-Up Mode 2) After the format of setting of the first dot Position on the left side is printed, the paper is automatically advanced for viewing after the printing is complete. The message of "1st Print Position Pos = xx" is printed. 3) Press NEXT and PREVIOUS Key to choose the new first dot position on the left side. The adjustment range is "01-15", and the center value is "08". It is possible to adjust different values for Tractor and Manual 3. Printing new value By pressing SETUP/EXIT Key, the adjustment value for the first dot position on the left side is determined and the adjustment value is saved. The new adjustment value of the first dot position on the left side is printed. The paper is automatically advanced for viewing after the printing is complete. After ejecting a paper, the message" 1st Print Position = xx" is printed. 1st Print Position xx . . . 1st Print Position yy Note) "yy" is New adjustment value 4. Exit the setting of the first dot position on the left side mode Turn the printer off to exit this mode. 4-28 Using Set-Up Mode Changing Menu Access Options You can restrict the access to the Set-Up functions to avoid accidentally changing the Set-Up options. MENU ACCESS Option and Values · Overprinted values are the factory settings. MENU ACCESS Options <MENU-ACCES> Values Description Specify the type of access to the Set-Up functions from the control panel or from the <FUNCTIONS> menu. Only MACRO functions are accessible from the <FUNCTIONS> menu. READY, PARK and LOAD require the ALT key to be used as a two key operation for these functions. Note: You can return to the All Functions Accessible mode by turning the printer on while pressing the ALT, PARK and LOAD buttons at the same time. The printer enters the Set-Up mode with this operation. ALL FUNC MACRO ONLY NO ACCESS SAFE PANEL 1. To enter Menu Access mode: 1) Make sure that the tractors are loaded with continuous feedpaper and that the paper select lever is set forward. [. . . ] When continuous forms paper is loaded, it moves forward from the park position to the platen. Permanent Memory Memory that retains information even when power is turned off. The printer's permanent memory retains the default settings specified using the printer Set-Up mode. Pitch Characters per horizontal inch (cpi). Printing Test A test that determines whether the printer is working correctly. Test pages are printed to show print quality and verify whether all characters print. The printing test only tests the printer. [. . . ]