User manual TAMRON SP AF 17-50MM F 2.8 XR DIII LD ASPHERICAL

[. . . ] Before using your new lens, please read the contents of this Owner's Manual thoroughly to familiarize yourself with your lens and the proper techniques for creating the highest quality images possible. With proper handling and care, your Tamron lens will give you many years of photographing beautiful and exciting pictures. FOCUSING (Manual Focus) (Ref. 2 ) (A13, A14, A15, A16) cameras, set the AF-MF switch w to the MF position. 2) Engage the hood attachment bayonet ring 5 with the hood attaching tabs on the hood. 3) Turn the lens hood 1 clock-wise until it clicks into the locking position. Detaching the stored lens hood (Ref. [. . . ] Using a tripod or monopod is also effective. When set on AF mode, interfering with focusing ring may cause serious damage to the lens mechanism. Certain camera models may indicate the maximum and minimum aperture values of the lens appropriate numbers. This is inherent to the design of the camera and not an indication of an error. When using a special filter such as a PL filter on the A16, use low-profile filter. The thick rim of a normal filter may cause vignetting. ft 1000 3 m ft m A14 Only How to mount the lens Attaching the Lens Hood (Ref. 7 & 8) A15 135 100 85 70 55 135 100 85 70 55 135 100 85 70 55 13 11 15 15 14 13 11 15 13 11 How to detach the lens Removing the rear cap of the lens. Align the Lens attachment mark e on the lens barrel with its counterpart on the camera mount and insert the lens. Rotate the lens clockwise until it click-locks. For Nikon and Pentax models, align the lens attachment mark on the camera and the Lens attachment mark e on the lens to attach the lens. For Nikon models, align the lens attachment mark with the dot on the camera and rotate the lens counter-clockwise until it click-locks. Pressing the lens release button on the camera down, turn the lens counter-clockwise (in case of Nikon lens, clockwise), and lift the lens off the camera's lens mount. The image circles of Di II lenses are designed to match the digital SLR cameras using the image sensors equivalent to APS-C (approx. Do not use Di II lenses with cameras using image sensors larger than APS-C. Using Di II lenses with such cameras may cause vignetting on the image. Some Canon digital SLR cameras have index marks for attaching both EF lenses (red) A and EF-S lenses (white) B on the bayonet mount. To attach Tamron DiII lenses, align the lens attachment mark on the lens e with the index mark for EF lenses (red) A. Do not forcibly align the indicator on the lens e with the index mark for EF-S lens (white) B. Doing so could result in damage to the lens and/or camera. Align the index mark 2 on the hood with the corresponding index mark 5 or the top of the index line of the distance scale) on the lens. Press the hood lightly onto the hood attaching bayonet ring (Fig. 1) and then rotate it clockwise to secure (Fig. The lens hood will be securely held as the mark "TAMRON " comes to the top (Fig. [. . . ] Canon AF : sélecteur ON [marche] (gauche), OFF [arrêt] (droite). Selector AF Canon ON (izquierda), OFF (derecha). Canon AF-schakelaar AAN (links) en UIT (rechts). Canon AF botão ON (esquerda), OFF (direita). [. . . ]