User manual TANGENT ALIO CD-DAB

[. . . ] This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrical shock or fire. The protection devices built into this unit will protect the user if the procedures below are observed in connection with installation, use and repair. This unit is fully electronic and contains no parts that can be repaired by the user. [. . . ] - In places with high temperatures (40C or more) or high relative humidity (90% or more). - In dirty places as some internal parts may be damaged. Do not put your fingers or any other objects into the unit - Touching the internal parts is dangerous and may cause injury or damage. - Do not place any foreign matter in the unit. Interference Placing the unit near a television set, radio or video player may cause poor picture and sound quality. In that case, move the unit further away from the television set, radio or video player. 07 CONNECTION Connection to the mains OPTICAL STEREO OUTPUT Model: ALIO CD-DAB Power rating: AC 220V - 240V~50Hz Max Power Consumption:10W R L AC 220V - 240V~50Hz ON POWER OFF Do not turn on the power before all connections have been made correctly. Check that all connections have been made correctly before turning on the power. Check that the mains voltage is 230-240V AC50Hz before turning on the power. Connection to the mains Check that all other connections have been made correctly before inserting the mains plug into the wall socket. Then insert the plug into a suitable socket. If the unit is to be used abroad, you may need an adapter. 08 REMOTE CONTROL Installation of batteries 1 Remove the cover as illustrated. 3 Replace the cover. 2 Position two batteries of the type AAA/R03/UM4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). - Do not mix new and old batteries and do not use different types of batteries. - If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion. Using the remote control Direct the remote control at the sensor on the front panel of the unit. Prev/Next: Selects the previous or next track. Repeat: Makes it possible to play the tracks of a CD a certain order. Random: Makes it possible to play the tracks of a CD in random order. Rewind: Makes it possible to fast reverse. Forward: Makes it possible to fast forward Play/Pause: Starts playback at first press and stops playback at second press. Open/Close: Opens and closes the CD tray. 11 FRONT PANEL AND CONNECTIONS Connections OPTICAL STEREO OUTPUT Model: ALIO CD-DAB Power rating: AC 220V - 240V~50Hz Max Power Consumption:10W R L AC 220V - 240V~50Hz ON POWER OFF 1 2 3 4 1. 4. Optical output: For connecting to an amplifier or receiver digitally. For connection to stereo amplifier or receiver with analogue input. AC input: For connection of mains voltage. Make sure that the plug has been correctly inserted, and that the voltage corresponds to the text printed on the back panel of the cabinet. Main power switch: Used to interrupt the mains voltage. Explanation of display This unit does not feature any OSD (On Screen Display). [. . . ] Press the RANDOM button again if you wish to deactivate random play. Note: When you press I<< or >>I during random play, it will not be possible to select the next track but any other track. CD 02 ran 04 : 26 16 OPERATION AND FUNCTIONS Program The ALIO CD-DAB can be programmed to play the tracks of a CD in a certain order. Press the MEMORY button when playback has been stopped. The display will show the message "MEM01 = 01" The number to the left is the total numbers of tracks programmed. [. . . ]