User manual TANGENT CDP-200

[. . . ] Design and Engineering CDP-200 Instruction manual CD Player The objective of every Tangent product is that fundamentally correct design can produce a product capable of achieving excellent performance and affordability. www. tangent-audio. com This operation manual supplies all the information that you need to have about your Tangent CDP-200. Please read this operation manual carefully before you start using the unit! 02 CONTENTS CONTENTS Contents 03 CONNECTION Audio connection layout 13 SAFETY PRECAUTIONS Safety precautions 04 OPERATION AND FUNCTIONS ON, OFF and standby Load a disc Play Pause Stop/Clear Previous and next Forward and rewind Random Program Repeat 14 14 14 15 15 15 16 16 17 17 IMPORTANT SAFETY INSTRUCTIONS Important safety instructions 05 IMPORTANT INFORMATION Important information 07 CONNECTION Connection to the mains 08 TROUBLESHOOTING Troubleshooting 18 REMOTE CONTROL Installation of batteries Using the remote control Remote control functions 09 09 10 TECHNICAL DATA Technical data 19 FRONT PANEL AND CONNECTIONS Front panel Connections Explanation of Display 11 12 12 03 SAFETY PRECAUTIONS A triangle with a lightning symbol draws the user's attention to "dangerous voltage" without insulation in the cabinet which may be high enough to entail a risk of electric shock. A triangle with an exclamation mark draws the user's attention to important instructions for use and maintenance in the accompanying manual, which should be studied. A symbol for CLASS II (double insulation) WARNING: TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET AS IT CONTAINS DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE. CAUTION: If the plug of the power cord needs to be replaced, it is important that the replacement is identical to the plug to be replaced, or that the new plug has been recommended by the manufacturer TO AVOID ELECTRICAL SHOCK, IT IS IMPORTANT TO INSERT THE PLUG CORRECTLY INTO THE SOCKET. 04 IMPORTANT SAFETY INSTRUCTIONS WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT. [. . . ] Make sure that the orientation of the batteries is correct (see drawing at bottom). - Do not mix new and old batteries and do not use different types of batteries. - If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion. Using the remote control Direct the remote control at the sensor on the front panel of the unit. When the remote control signal is received, the unit reacts accordingly. The remote control works within a range of 6 metres. CDP-200 CD-PLAYER DIGITAL AUDIO STANDBY / ON REWIND FORWARD POWER 1 2 3 4 5 6 7 8 9 AUTOTUNE 0 ST/MO 10+ MEMORY DISPLAY CD DVD TUNER T MODE AUX1 AUX2 AUX3 PHONO STATION STATION ENTER TUNING TUNING AUDIO SETUP MENU VOLUME SUBTITLE TITLE MUTE REPEAT RANDOM SLOW HIFI-200 - Sometimes the remote control does not work well in strong light. You may have to move the unit if it is a problem. Malfunction may occur if other remote controls are used near the unit. Do not place any objects on the remote control, as the batteries may become flat if a key is depressed constantly. Make sure that there are no obstacles between remote control and unit. Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control. 09 REMOTE CONTROL Remote control functions POWER 1 8 1 1 2 3 4 2 3 2 5 6 7 8 9 AUTOTUNE 0 ST/MO 10+ MEMORY DISPLAY 9 10 4 5 6 7 8 9 CD DVD TUNER T MODE 11 3 AUX1 AUX2 AUX3 PHONO STATION STATION ENTER 12 TUNING 10 11 12 13 14 TUNING AUDIO SETUP MENU VOLUME SUBTITLE TITLE MUTE 4 5 6 7 REPEAT RANDOM SLOW System off: Sets all devices in the hifi 200 series into standby 0-9 Digits: Selects tracks on the CDP-200. CD: Turns the CDP- and AMP-200 on and selects the CD input on the AMP-200. The DVD, TUNER, AUX1, AUX2, AUX3 and PHONO buttons will set the CDP-200 into standby. Random: All tracks on the disc loaded in CDP-200 are played in random order. Repeat: Repeats a single track or all tracks on a disc on CDP-200 Previous/Fast reverse: Selects the previous track on CDP-200. Press and hold to rewind playback Stop: Stops playback on CDP-200 Eject: Opens and closes the disc tray on the CDP-200 +10: Use this button along with the 0-9 digits to select tracks on the CDP-200 above 10. For example press the +10 button and the 5 digit to select track 15 on a disc. Display: Canges between showing the time of Track Elapsed, Track Remain and Disc Remain on the display Memory: Use this button to set the playback order to a prefered order. Enter: Use this button when setting the memory playback order. Play/Pause: Starts and pauses playback on CDP-200. Next/Fast forward: Selects the next track on CDP-200. Press and hold to fast forward playback 13 14 HIFI-200 Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Note that the accessories in the pictures on this page are not included in the supply. 13 OPERATION AND FUNCTIONS On, Off and standby 1 Turn on the unit by pressing the mains switch on the rear panel. [. . . ] The number to the right is the track number programmed to the number in the programmed order. Finish the programming by pressing PLAY. For examble if you wish to program the track numbers 5, 8, 4 in this specific order the following must be done: - Press the MEMORY button. - Confirm the programming by pressing PLAY. [. . . ]