User manual TANITA HC 207 ALCOHOL SENSOR

[. . . ] This will remove any odors or moisture left in the product. Turn the unit on by pushing the power button. The Odor Symbol will appear and count down from 3­1. When the word "Start" is displayed, breathe into the sensor for three seconds. [. . . ] For best results, breathe into the sensor as if you are yawning. Try to breathe out the same amount of air at the same speed each time you test your breath. When the test is complete, the unit will beep. Your breath odor level will appear on the display and flash for several seconds. Then the unit will turn off. Breathe out 1234 Your breath odor level will appear Note: The power will turn off automatically if you don't breathe into the sensor within five seconds after the display indicates you should start measuring. Breath Odor Level Error. Please try again No odor Slight odor Moderate odor Strong odor For the Most Accurate Readings · Readings should not be taken during or immediately after using mints or breathspray, eating or drinking. Wait at least ten minutes before using BreathAlert. · Rinse your mouth thoroughly after cleaning your teeth or using mouthwash. Wait at least ten minutes before using BreathAlert. · BreathAlert is sensitive to certain environmental factors that can interfere with the unit's ability to detect breath odor level correctly. For best results, avoid: ­ Hot and humid places ­ Windy areas ­ Air polluted areas Note: Usage in such environments may damage the product. · If you don't use BreathAlert for an extended period of time, test your breath odor level several times to re-activate the product. About the BreathAlert Replacing Batteries The LCD display will flash a Battery Icon to indicate that the batteries are low. This product is designed for Personal use only. Tanita Corporation of America reserves the right to nullify the warranty agreement should the product be used in a commercial environment. This warranty is void if the product has been tampered with or mistreated, or if the defect is related to servicing or parts not supplied by us. Our obligation under this warranty is limited solely to the charge of repairing the product, plus the cost of parts or, at the option of Tanita, replacing the product with an equivalent model. There are no express or implied warranties except as listed above. Tanita is not liable for incidental or consequential damages for failure or malfunction of the product and any recovery may not be greater than the purchase price paid for this product. Some states do not allow limitation on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. No person is authorized to change the terms of this warranty. If Product Is Defective or Needs Repair Do not return this product to the place of purchase; doing so may delay the processing of your warranty claim. Call Tanita at 1-800-TANITA-8 to receive a Return Authorization Number before returning this product. Proof of purchase must accompany the product. [. . . ] It is important that you pack the product carefully prior to shipment to prevent damage in transit and that you include a letter describing in detail the specific condition requiring adjustment or repair. After Warranty Repairs Please call Tanita at 1-800-TANITA-8 (USA and Canada only). Please complete the following information and retain for your records. Model: BreathAlert Date Purchased: Purchased From: Address: (HC201E) / / * Customers from the United Kingdom should use a separate warranty, and contact Tanita's office in the UK. Please see separate warranty for the UK for further details. Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]