User manual TANNOY EATON technical manual

[. . . ] Press and hold for 2 seconds and release the Power On button to turn on all devices programmed into the remote; press and hold the Power Off button to turn all of these devices off. Press and hold for 2 seconds and release any Source Input selector on the remote to turn on the CVR700, EATON and source device, to select the source, and to begin playing the last disc, tape or television channel. For external sources, or when Autosize is off, press the Letterbox button repeatedly to scroll through applicable video-display options (with or without black bars, scaling, aspect ratio). Press the Frame button to scroll through all options. 250 Crossways Park Drive, Woodbury, New York 11797 www. jbl. com © 2004 Harman International Industries, Incorporated Part No. [. . . ] This Quick-Start Guide will help you with a basic system installation. For detailed information on any step, please refer to the Owner's Manual. We strongly recommend that you read the two Owner's Manuals for the loudspeakers and for the CVR700/EATON for complete details on how to install, configure and operate the TANNOY Cinema Vision System, as well as for the important safety information they contain. TANNOY CINEMA VISIONTM SYSTEM QUICK-START GUIDE AM Antenna The colors shown for each speaker correspond to the matching output terminal connection on the back of the CVR700. FIGURE 1 ­ SPEAKER PLACEMENT Video Connections Audio Connections S-Video Composite Optical Coaxial Digital Audio Connections Back Surround Subwoofer Side Surround Center Front Match the colored jacks on the CVR700 to the appropriate jacks on your source equipment or speakers. The colors are standardized, but not all equipment or connectors use them. CONNECTIONS COLOR GUIDE ® PRO CINEMA COMES HOMETM Left Right Alternate positions for surround speakers in a 5. 1 system; required positions for back surround speakers in a 7. 1 system. SIDE SURROUND LEFT SPEAKER (Blue) BACK SURROUND LEFT SPEAKER (Brown) BACK SURROUND RIGHT SPEAKER (Tan) TANNOY CINEMA VISIONTM SYSTEM QUICK-START GUIDE FRONT LEFT SPEAKER (White) CENTER SPEAKER (Green) SIDE SURROUND RIGHT SPEAKER (Gray) Step 1. Install the EATON plasma screen and place your speakers in the listening room. See the owner's manual for instructions on assembling the credenza stand for the EATON screen or for wall-mounting; see the CVSAT50 owner's manual for instructions on assembling the CVTS50 table stands or for wall-mounting. The CVSAT50 speakers may be mounted in-wall using the optional CVIW50 in-wall adaptors and CVRIF50 rough-in frames. Proceed to Step 2 on back cover. SPEAKER PLACEMENT SUBWOOFER (Purple) FRONT RIGHT SPEAKER (Red) Digital Recorder DVI/Computer Component Video L R Optical Coax FIGURE 4 ­ SOURCE COMPONENT CONNECTIONS Dashed lines (­ ­ ­ ­) indicate a choice of either coaxial or optical digital audio connections for each device. Dotted lines (····) indicate a choice of component, composite or S-video connections for each device, or DVI (HDCP) (cable not included) or analog VGA (cable included) for the DVI/Computer source only. Component video is the preferred connection, but in order to see the on-screen menus, you must also make the S-video connection. When the on-screen menus are activated while the DVI/Computer source input is in use, the picture will be of the last source used before DVI/Computer if that source had an S-video connection to the CVR700. Scroll to Sources and press the Set button to view the Sources menu. Scroll to the Audio Input line and use the arrow keys to select the source's coaxial or optical digital audio input. Scroll to the Video Input line and use the arrow keys to select the source's S-video or component video input. line to indicate 16:9 aspect ratio, which should be used whenever available. You may not assign one source's audio or video input to another source (except you may assign a video source to the tuner). In/Rec L R Optical Coax Video S-Video Y Pb Analog VGA Output DVI Video Output Out/Play Pr Game/Camcorder Optical Coax S-Video Component Video Video Audio CVR700 Front Panel GAME/CAM L R Optical S-Video In/Rec L R VIDEO S-VIDEO Component Video L R Video S-Video Y Handheld Personal Recorder (MD, MP3, etc. ) OPTICAL DIGITAL AUDIO INPUT (S/P-DIF) Pb Out/Play Video Coax Optical Coax Pr Cable Box, Satellite Receiver or Other A/V Device VCR HDTV Tuner or Cable Box or Satellite Receiver The default surround audio mode is Logic 7, with Dolby Digital and DTS digital signals detected automatically. See the owner's manual for more surround mode options. Configure speakers: If you are using the TANNOY Cinema Vision loudspeakers, you only need to specify a 5. 1- or 7. 1-channel system. Press the OSD button on the remote to view the main audio menu, then use the arrow keys to scroll down to the System Configuration line and press the Set button to select it and configure 5. 1 or 7. 1. For a 7. 1 system operation, you must also select the Speakers line in the main menu and scroll to the Configuration submenu to set the back surround speakers. If you are using other speakers, you will also need to configure their frequency-response capabilities using the other menus. See the owner's manual for details. ® ® Step 10. [. . . ] See the owner's manual for details. ® ® Step 10. Set the output levels with EzSet: Set the Volume to ­2dB. Sit in the listening position and hold the CVR700R2 remote in front of you at shoulder level, pointing it at the EATON screen power-on LED or at the CVR700 front-panel display (if a EATON is not being used). Press the SPL button on the remote, and then the Set button when it lights red. [. . . ]