User manual TASCAM CC-222MK3

[. . . ] » CD Recorder/Cassette Deck D00903120B CC-222MK$ Professional OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS 1- Introduction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. [. . . ] If the tape is already in playback mode, these act as the search keys. 5 Tape REC MUTE key When recording to cassette and this key is pressed, the sound is muted for about four seconds, and the unit enters record standby mode. 6 Tape REC key When stopped, pressing this key enters recording standby mode. 7 Tape STOP key Stops the current tape transport operation. 8 Tape PAUSE key Stands by for tape playback or recording. Pressing this key again resumes the operation. 9 Tape PLAY key Starts tape playback or recording, from right to left. d CD SKIP Â/¯ keys Used to select tracks or menu parameter values. f CD REC key Places the disc in record standby mode and performs manual track incrementing while recording. g CD REC MUTE key During disc recording, pressing this key inserts a silence of about four seconds and pauses recording. h FINALIZE key Used when finalizing recordable discs. j ERASE key Used when erasing data from CD-RW discs. k SYNC REC key Turns synchronized recording of the disc recorder on and off. l CD STOP key Stops CD playback or disc recording. ; CD PAUSE key Pauses or resumes CD playback or recording (starts recording from record pause mode). z CD PLAY key Starts CD playback or recording (from record standby mode). 1 TASCAM CC-222MKIII 3- Menu operation Menu operation The following are the menu items that can be set using the MENU key. The majority of them affect disc recording. Pressing the MENU key repeatedly cycles through the menu items. Not every menu item is available in every situation (for instance, if a digital input is not selected, the digital direct option is not shown). 1 PresstheMENUkeyuntilthedesiredmenuis shownonthedisplay. 2 TurntheMULTI DIALtochangeavalueorsetting. 3 PushtheMULTI DIALtoconfirmthechangeand exitthemenuitem. Alternatively, keeppressingtheMENUkeyuntil thenormaltimecounterisdisplayed. Menu configuration Menu displayed SRC VOLUME A_TRK A_TIME S_LVL COPYID FADEIN FADEOUT DUB>VOL PHONO MP3DIR Meaning Default (factory) value ON 0dB LEVEL 1min ­24dB(analog) ­54dB(digital) 1GEN 3s 3s THRU DISC OFF Described in: "SamplingFrequencyconversion"onpage20 "Signalvolume"onpage20 "Automatictrackdivision"onpage25 "Automatictrackdivision"onpage25 "Settingthetriggerlevel"onpage24and "Usingthetriggerlevel"onpage24 "Copy-protection"onpage26 "Fade-inandfade-out"onpage25 "Fade-inandfade-out"onpage25 "DubbingtapesfromtheCDdeck"on page30and"Dubbingfromtapetodisc" onpage23 "RecordingtapesfromthePHONOdeck" onpage31and"Recordingtodiscfrom theRIAAPHONOinputs"onpage22 "Directoryplaybacksetting"onpage19 Samplingrateconverter Digitalvolumecontrol Automatictrackincrement Automatictrackincrement Sound(trigger)levelfortrackincrement Copy-protectiononrecordeddiscs Allowsfadeinofrecordeddiscs Allowsfadeoutofrecordeddiscs Bypasses(THRU)orenables(ON) internalvolumewhendubbingfrom tapetodiscordisctotape SendsthePHONOinputstoDISCor TAPE Recordsdirectlyfromdigitalsource todisc TASCAM CC-222MKIII 1 4- Disc operations Simple playback operations WARNING 4 PressthePLAYkeytostartplayback 5 PresstheSTOPkeytostopplayback 6 PressthePAUSEkeytopauseplaybacktemporarily. [. . . ] When the item is reached, playback starts. When the end of the tape is reached, the transport stops. If a key are pressed too many times, so that a search is being made for the wrong item, pressing the "opposite" key corrects the mistake. NOTE This function depends on the presence of 4-second silent intervals on tape. If these intervals are too short, or not truly silent, the search function will not work properly. [. . . ]