User manual TASCAM CC-222SL

[. . . ] » CC-222SL CD Recorder/Cassette Deck D00964320A Professional OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS 1- Introduction CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. [. . . ] 8 Tape PAUSE key Stands by for tape playback or recording. Pressing this key again resumes the operation. 9 Tape PLAY key Starts tape playback or recording, from right to left. 0 Tape PLAY¥ key Starts tape playback or recording, from left to right. q CONT PLAY key Use this key to turn continuous playback (alternating between disc and cassette) on and off. h FINALIZE key Used when finalizing recordable discs. j ERASE key Used when erasing data from CD-RW discs. k SYNC REC key Turns synchronized recording of the disc recorder on and off. l CD STOP key Stops CD playback or disc recording. ; CD PAUSE key Pauses or resumes CD playback or recording (starts recording from record pause mode). z CD PLAY key Starts CD playback or recording (from record standby mode). 1 TASCAM CC-222SL 3 ­ Menu operation Menu operation The following are the menu items that can be set using the MENU key. The majority of them affect disc recording. Pressing the MENU key repeatedly cycles through the menu items. Not every menu item is available in every situation (for instance, if a digital input is not selected, the digital direct option is not shown). 1 PresstheMENUkeyuntilthedesiredmenuis shownonthedisplay. 2 TurntheMULTI DIALtochangeavalueorsetting. 3 PushtheMULTI DIALtoconfirmthechangeandexit themenuitem. Alternatively, keeppressingtheMENUkeyuntilthe normaltimecounterisdisplayed. Menu configuration Menu displayed SRC VOLUME A_TRK A_TIME S_LVL COPYID FADEIN FADEOUT DUB>VOL PHONO MP3DIR OUT2 Meaning Default (factory) value ON 0dB LEVEL 1min ­24dB(analog) ­54dB(digital) 1GEN 3s 3s THRU DISC OFF TAPE Described in: "SamplingFrequencyconversion"onpage20 "Signalvolume"onpage20 "Automatictrackdivision"onpage25 "Automatictrackdivision"onpage25 "Settingthetriggerlevel"onpage24and "Usingthetriggerlevel"onpage24 "Copy-protection"onpage26 "Fade-inandfade-out"onpage25 "Fade-inandfade-out"onpage25 "DubbingtapesfromtheCDdeck"on page30and"Dubbingfromtapetodisc" onpage23 "RecordingtapesfromthePHONOdeck" onpage31and"Recordingtodiscfrom theRIAAPHONOinputs"onpage22 "Directoryplaybacksetting"onpage19 "OUT2setting"onpage32 Samplingrateconverter Digitalvolumecontrol Automatictrackincrement Automatictrackincrement Sound(trigger)levelfortrackincrement Copy-protectiononrecordeddiscs Allowsfadeinofrecordeddiscs Allowsfadeoutofrecordeddiscs Bypasses(THRU)orenables(ON) internalvolumewhendubbingfrom tapetodiscordisctotape SendsthePHONOinputstoDISCor TAPE Recordsdirectlyfromdigitalsource todisc Assign the OUTPUTS2 jacks to TAPE or DISC TASCAM CC-222SL 1 4 ­Introduction 1- Disc operations Simple playback operations WARNING If you are monitoring using headphones, first adjust the level control to low on the unit, then connect to the PHONES jack before playing back. This will prevent any possible damage to your hearing. 2 PressthePLAYkeytostartplayback The track number indicators at the bottom of the display light, to show the available tracks playing back. If there are thirteen tracks on the disc, for example, indicators 1 through 13 will light. If there are more than 20 tracks on the disc, "OVeR" will light at the end of the track number indicators. Pressing the PAUSE key pauses playback temporarily. To resume playback, press the PAUSE key again or the PLAY key. 1 Insert a disc with the label side uppermost until the unit pull the disc in. When a disc is loaded into the unit, the display briefly shows TOCReading. [. . . ] spoken word drama or classical music). OUT2 setting (TAPE or AUTO) Using the OUT2 menu, you can assign the LINE OUTPUTS2 to TAPE or AUTO (the default setting is TAPE). If TAPE is selected, the unit outputs only the cassette tape when playing back or monitoring. If AUTO is selected, the unit outputs either the cassette tape or disc automatically when playing back or monitoring. However, note that if both are playing at same time, the cassette takes priority (the disc will not be heard through these outputs). [. . . ]