User manual TASCAM CD-01U PRO QUICK START GUIDE

[. . . ] Note that the illuminated SHIFT indicator does not turn off until you press the SHIFT key again. Playback mode The unit has four playback modes: normal (continuous), single, program and random. By pressing the PLAY MODE key on the remote control unit, you can select the desired playback mode. You can also select the playback mode using the front panel CALL (PLAY MODE) key while the SHIFT indicator is lit. The currently selected mode is shown on the display. [. . . ] The repeated area depends on the current playback mode (for example, if SINGLE mode is selected, the unit repeats the current track). You can enable or disable the repeat function by Note that some menu items need different procedures. 2 pressing the REPEAT key. You can also enable or disable the repeat function using the REPEAT menu item (menu 03). A-B repeat playback You can play back the desired portion (between points A and B) on a track repeatedly by the following procedure. When the repeat playback function is disabled, during playback, press and hold down the REPEAT key until REPEAT on the display starts flashing. Press the REPEAT key at the beginning of the desired portion. Press the REPEAT key at the end of the desired portion. The B point is set and the unit automatically starts repeat playback between the A and B points. To stop A-B repeat, press the ·key. Tip shows the next program number. Repeat steps 2 and 3 above as many times as needed. When you finish creating the program, press the PGM key to exit the program setting mode. On the program setting screen, use the SEARCH keys to select the program number to which the track you want to replace is set. Use the numeric keys or SKIP keys to select the desired track with which you want to replace the current track. Press either of the SEARCH keys to confirm the setting. On the program setting screen, use the SEARCH keys to select the program number to which you want to add a track. Use the numeric keys or SKIP keys to select the desired track. Press either of the SEARCH keys to confirm the setting. On the program setting screen, use the SEARCH keys to select the program number to which the track you want to delete is set. Press the A. CUE/DEL key. You can also carry out A-B repeat playback using the A-B option of the REPEAT menu item (menu 03). Program playback Using the program playback function, you can play back the desired tracks in the desired order. Creating the program 1. The display shows the program setting screen. The number on the right shows the program number. [. . . ] You can set the fade-out time as with the fade-in time. Confirming the fade-out setting exits the menu mode. Pitch control From the front panel, you can turn on or off the pitch control function by pressing the PITCH dial (while the SHIFT indicator is unlit) and change the pitch (speed) by rotating the PITCH dial. You can turn on or off the pitch control function using the PITCH key. When on, use the -/+ keys to change the pitch (speed). [. . . ]