User manual TASCAM CD-200

[. . . ] D01064220A CD-200 Compact Disc Player OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. [. . . ] Hold down this key to search for a part of a track in the reverse direction. Press this key briefly to skip to the next track. Hold down this key to search for a part of a track in the forward direction. For private listening, insert the headphones plug into this standard 1/4" stereo phone jack, and adjust the volume by turning the level knob. Use this switch to turn the pitch control function on or off. When the function is on, the indicator will light. Adjust the amount (±12. 5%) by turning the knob. (See "Pitch control" on page 21. ) When operating the remote control unit, point it towards here. SEARCH Ô [Â] 6 Press briefly to change the playback mode. The three playback modes are continuous, shuffle and programmed. (See "Playback modes" on page 17. ) Press and hold this key to use the Intro Check function. (See "Intro Check" on page 22. ) r REPEAT SEARCH [¯] 7 Press this key to select single repeat or all repeat playback. Press this key again to stop repeat playback. (See "Repeat playback" on page 21. ) t FOLDER (/¥) PHONES jack and knob 8 Use these keys when a data CD is in the player to change the playback folder. By selecting "ALL, " every folder on the disc is made subject to playback. (See "Folder playback (with data CDs only)" on page 17. ) PITCH CONTROL switch, indicator and knob 9 0 Remote Sensor q Display Displays various information. w DISPLAY Press this key to show for two seconds the type of information (playback time or text information) that currently appears in the main area of the display. 8 TASCAM CD-200 2 - Names and Functions of Parts Rear panel y ANALOG OUTPUT (UNBALANCED) jacks The CD playback signal is output here as stereo analog signals (­10 dBV). u DIGITAL OUTPUT (COAXIAL) jack The CD playback signal is output here as a digital signal in S/PDIF format. i DIGITAL OUTPUT (OPTICAL) jack The CD playback signal is output here as a digital signal in S/PDIF format. o VOLTAGE SELECTOR Switches the voltage to either 230 V or 120 V. · · The voltage selector is only available on units for specific markets. In North America, use only on 120V supply. TASCAM CD-200 9 2 - Names and Functions of Parts Remote control unit (RC-CD200) 1 Numeric keys Use these keys to select tracks. 2 DISPLAY Press this key to show for two seconds the type of information (playback time or text information) that currently appears in the main area of the display. Press this key again while this is being shown to change the type of information displayed. The type of information that can be shown depends on the type of disc loaded and the operation status. (See "Time and text information display" on page 20. ) 3 PLAY MODE/INTRO CHECK Press briefly to change the playback mode. The three playback modes are continuous, shuffle and programmed. (See "Playback modes" on page 17. ) Press and hold this key to use the Intro Check function. [. . . ] There is no disc or the disc cannot be verified. The disc has no files that can be played back. There is no artist data or no file data that can be displayed There is no title data that can be displayed. TOC information is being read. Response Load a disc that has MP3 or WAV files. [. . . ]