User manual TASCAM CD-200I

[. . . ] D01086320A CD-200i CD Player/iPod Dock OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This appliance has a serial number located on the rear panel. [. . . ] When pitch control is ON, digital output signal from CD-200i cannot be received in some equipment. · TASCAM CD-200i 11 2 - Names and Functions of Parts Display SHUFFLE (CD and iPod) 18 The SHUFFLE indicator appears during shuffle playback mode. If the output source is an iPod, this indicator lights during song shuffle playback and blinks during album shuffle playback. REPEAT, ALL (CD and iPod) 28 REPEAT ALL appears when it is set and REPEAT appears when single repeat is set. INTRO (CD) 38 INTRO lights when this function is on. MEMORY (CD) 48 MEMORY lights when programmed playback is on and blinks while you are setting the program. Folder number (CD) 58 When a data CD is in the unit, the folder number is shown when set to folder playback, and ALL is shown when set to disc playback (all folders). When an audio CD is in the unit, cd is shown. Alphanumeric display (CD and iPod) 68 The track number and time or text information is shown. The status of the unit (OPEN, CLOSE, TOC* READ, etc. ) and messages (NO DISC, etc. ) are also shown. Items with more than eight characters are scrolled when shown. * TOC means "Table Of Contents, " which is track information written on the disc CAUTION When a fourth-generation iPod or iPod mini is connected, and the output source is set to iPod, the SHUFFLE and REPEAT indicators are not shown on this unit's display. Check the iPod itself to confirm the iPod's current playback and repeat mode. 12 TASCAM CD-200i 2 - Names and Functions of Parts Remote control unit (RC-CD200i) Numeric keys (CD) 18 Use the numeric keys to select tracks by their track numbers (See "Selecting by track number" on page 23. ) A track number can have a maximum of two digits for audio CDs and a maximum of three digits for data CDs. INTRO CHECK key (CD) 28 During playback or when paused, press and hold this key to use the intro check playback feature. The beginning of each track on the CD will be played for 10 seconds in order. During intro check playback, press and hold this key again to return to the previous playback mode. (See "Intro Check" on page 30. ) DISPLAY key (CD and iPod) 38 When the output source is set to CD, press this key to change the type of time and text information shown on the display. When this key is pressed, the type of information currently displayed is shown for two seconds. Press the key again during this time to change the type of information shown. The information that can be shown depends on the type of disc and the status of operation. (See "Time and text information display" on page 28. ) When iPod is selected, you can switch whether its video is shown on the iPod itself or output through this unit's VIDEO OUTPUT jack. You cannot, however, switch the video output destination during video playback. Switch it while the iPod is stopped or stop the playback once and then switch it if the iPod is already playing back. If switched during video playback, the new output destination is used when playback is stopped then started again. PLAY MODE key (CD and iPod) 48 Changes the playback mode when the output source is set to CD. The three types of playback modes are continuous, shuffle and programmed. (See "Playback modes" on page 25. [. . . ] If this does not correct the problem, please contact a TEAC repair center. Message COMM ERR COMM ERR DEC ERR DISC ERR DRV ERR READ ERR Message lit or blinking Blinking Lit Lit Lit Lit Lit Meaning Cannot communicate with the CD drive. An error occurred during communication with the CD drive. The file type is not supported or otherwise could not be played The TOC or file system could not be read, or focus adjustment was not possible. [. . . ]