User manual TASCAM CD-BT2

[. . . ] » CD-BT2 Portable CD Bass Trainer D00997220A This device has a serial number on the rear panel. Please record it and retain it for your records. Serial number: __________________ OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS FOR U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter ference in a residential installation. [. . . ] (See "Using built-in effects" on page 31. ) 6 TIME DISPLAY key Press this key to open the TIME DISPLAY screen, which shows the status of the CD during playback and other information. (See "TIME DISPLAY screen" on page 21. ) 7 LOOP key Turns the loop playback and repeat playback functions ON and OFF. When IN and OUT points are set, this key turns 1 TASCAM CD-BT2 1 Display Shows CD status during playback, device settings and other information. IMPORTANT functions of parts Names and SAFETY PRECAUTIONS loop playback ON and OFF. When they are not set, it turns repeat playback ON and OFF. (See "Loop playback" on page 28 and "Repeat playback" on page 29. ) 8 IN/OUT key Use this key to set the loop playback IN and OUT points. (See "Loop playback" on page 28. ) 9 MISC. key Press this key to open the SETUP & MISC. Set and use the metronome and make various device settings on this screen. 0 TUNER key Press this key to open the TUNER screen. Use this screen for help tuning your instrument. (See "Using the tuner" on page 35. ) q LEVEL key Press this key to open the LEVEL screen. Make independent adjustments to the input signal and CD playback volumes on this screen to change the mix balance. (See "Using a bass with the trainer" on page 30. ) w CURSOR (§, ¶, , ¥) keys Select among setting items on the screen with these keys. e VALUE (+, ­) keys Change the value of the item selected on the screen. r PHONES VOLUME (+, ­) keys Adjust the volume sent to your headphones using these keys. The PHONES VOLUME screen appears during adjustment. t STOP key Stops a CD that is playing or paused. y ¥/ key Starts playback of a stopped or paused CD. u , ° key Press briefly to skip to the next track. Press and hold this key to fast forward through a track that is playing or paused. Press and hold this key when the CD is stopped to automatically skip forward (increment) though the tracks. i µ, key Press briefly to skip to the previous track. [. . . ] A footswitch can be set to control FLASH BACK, fast reverse or fast forward, as well as to change the effect bank or turn the effects ON and OFF. Setting the polarity When using a footswitch other than a TASCAM RC-30P, the polarity might need to be changed. Use the CURSOR (§, ¶) keys to select the FOOT TYPE item and the VALUE (+, ­) keys to select NORMAL or INVERT according to the type of footswitch used. Connecting a footswitch Connect a TASCAM RC­30P or other momentary footswitch (non-latching) to the FOOT SW jack on the front of the unit. screen and make settings as necessary. Setting the function Use the CURSOR (§, ¶) keys to select FOOT FUNC, and the VALUE (+, ­) keys to choose one of the following functions. FLASH REW FF BANK EFFECT functions like the FLASH BACK key functions the same as the µ/ key functions the same as the /° key changes the effect bank turns the effects ON and OFF TASCAM CD-BT2 IMPORTANT SAFETY PRECAUTIONS Making various settings You can change various settings to optimize the device for your use environment and other requirements. All of the following items are on the SETUP & MISC. [. . . ]