User manual TASCAM CD-D11U

[. . . ] CD-D11U 1x1 CD Duplicator with USB Output User's Manual Safety Precautions TASCAM CD Duplicator systems are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] There are various settings available under the Setup menu that control the operation of the CD Duplicator. However, TASCAM recommends that you use the original default settings for optimal operation. 9. 1 Language The CD Duplicator LCD panel can display text in English and Spanish. 9. 2 Burn Speed This setting controls the writing speed of the target drive. The default setting is MAXIMUM, which uses the highest writing speed of the target drive. On occasion, using the maximum writing speed will cause copy failure due to poor quality CD-R discs or unstable CD writing at high speed. In this case, TASCAM recommends that you lower the writing speeding. 9. 3 Read Speed This function will set the reading speed of the target drive. 9. 4 Auto Start Drive This setting enables the CD Duplicator to auto-start the copy or test process as soon as a blank disc is inserted into the target disc. 9. 5 Startup Menu This setting selects one of the menu items to be displayed as the first menu item when you turn on the CD Duplicator. COPY is the default menu item selected. TASCAM CD-D11U User's Manual 11 9. 6 Auto Verify 9. 6 Auto Verify This setting controls auto verification of discs after a copy process. 9. 7 Auto Compare This setting controls auto-comparison of data between source and target discs after a copy process. 9. 8 Auto Prescan This setting controls automatic prescan in the source disc whenever a data/audio disc is inserted in the source drive. 9. 9 Eject Disc This setting controls the ejection of discs by the target drive. Three options are available: Eject Good Only ­ This option ejects only successfully copied discs. This is the default setting Eject All Disc ­ This option ejects successful and failed copied discs Do Not Eject ­ With this option, all discs remain in the target drive. Manual ejection is required after every copy process. 9. 10 Burn Mode This setting controls three writing methods: Disc At Once (DAO) Track At Once (TAO) TAO Not Close DAO is the default setting. 9. 11 Display Time This function displays the total time of each copy process. The default setting is OFF. 12 TASCAM CD-D11U User's Manual 9. 12 Button Sound 9. 12 Button Sound This setting turns the button sound On or Off. 9. 13 Device Info This function displays information for both the source and target drive. 9. 14 System Info This function displays information for the interface board. 9. 15 Quick Erase This function performs a Quick erase on CD-RW discs. [. . . ] Damage resulting from repair or attempted repair by anyone other than TEAC Service Department. Damage resulting from modification or attempted modification of product not authorized by TEAC. Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user. Damage to any unit that has been altered or on which the serial number has been defaced, modified or removed. [. . . ]