User manual TASCAM CD-RW4U QUICK START

[. . . ] prevent the recorder making a new track every time there's a quiet passage in the music?Use the menu system to set the auto track function off, or reset the trigger level so that quieter passages don't start a new track. For recording from analog sources, use the front panel INPUT level to adjust the volume. For digital recordings, use the VOLUME menu to cut or boost the digital signal. [. . . ] Pause playback with the PLAY/PAUSE key (main unit) or the PAUSE key (remote control unit). Stop playback with the STOP key (main or remote control unit). Programmed playback 1 2 3 4 5 Press the PLAY MODE key (remote control unit) until the display shows Program. Use the MULTI DIAL (main unit) or SKIP keys (remote control unit) to select a program step. Press the MULTI DIAL or the ENTER key (remote control unit). Start playback (PLAY/PAUSE or PLAY). Recording 1 2 3 6 4 5 7 1 2 3 Insert a recordable disc. Select the source (analog or digital) with the INPUT SELECT key. If you selected the analog input jacks, you can adjust the input level with the INPUT control knob (main unit). Use the VOLUME menu system to adjust digital levels if necessary. Press the PLAY/PAUSE (main unit) or PLAY key (remote control unit) to start recording. Press the PLAY/PAUSE or PAUSE key to pause recording. When you restart recording, a new track will be started. Enter track divisions "on-the-fly" by pressing RECORD (either the main unit or remote control unit). Finish the recording session by pressing STOP. Finalize the disc before playing it back on an ordinary CD player. Press FINALIZE (main unit), followed by pressing the MULTI DIAL (main unit) or the ENTER key (remote control unit). 8 4 5 6 7 8 Quick Start Guide Safety precautions · CD-RW4U Although some of these precautions may seem obvious, we strongly suggest that you read and take note of them in order to avoid any possible trouble with your CD-RW4U. Full safety instructions are included in the manual. Read the manual and keep it in a convenient place!The manual can be your friend in times of trouble. Read the manual to find out what's there and what the CD-RW4U can do, follow the instructions in the manual, and take note of the notes and warnings. If the unit needs to be cleaned, disconnect it from the power supply first. Use a damp cloth for cleaning, and avoid using liquid cleaners or aerosol cleaners. Only use any accessories or attachments recommended by TEAC. [. . . ] If you are in any doubt, consult a qualified electrician to check your power supply. Always route the power cord where it will not be trapped or pinched, and where you will not trip over it. Do not overload sockets, power adaptors or extension cords. If the plug supplied with this unit is polarized (one blade of the plug is wide than the other) do not attempt to fit the plug the wrong way round into an outlet. [. . . ]