User manual TASCAM CD-RW750 ANNEXE

[. . . ] Adaptec 2903B Driver - If you are using the 2903B SCSI card, you will need to install this driver to recognize the card. If you are not using the SCSI card, DO NOT install this driver. CD-R Pro Only: Xing Technologies AudioCatalyst - MP3 Encoding Adaptec Jam - Advanced Audio CD Authoring The CD-R58S driver file MUST be placed in the same folder as the Jam application. This file is on the CD-R Pro software CD. Installing the Software A hardware installation booklet has been included with this package; look to it for installation of the CD-Recorder. [. . . ] You've just completely mastered your audio! The Master Screen Also included with SparkLE are several plug-ins for real time processing. SparkOneBand is a single band of parametric EQ. There's also TC|DelayIt, a delay processor. To get to the plug-in control screen, click on the Windows menu above, and select Show Master. The window should pop up with 4 blank plug-in sockets. To add a plug-in to the chain, select a location, and press Add in the top of the window. The plug-in screen should show up, offering controls for the plug-in. To remove a plug-in, select the plug-in you want to remove, and press Remove at the top. The great thing about having several plug ins, is the ability to mix and match. You can have the maximizer, a delay, and two bands of EQ. Or, you can have 4 bands of parametric Adaptec Jam! CD-R Pro Only To start assembling your CD, boot up Jam and simply drag and drop all the song files into the Jam window. curves; each curve represents channel levels over the length of the crossfade. ) Again, there are far more advanced features included with this package, but we'll leave that to the Jam manual. (The crossfades are represented by two Adaptec Toast double click on the CD icon and name it whatever you like. When you are through assembling the CD, click Done. Once you've got your CD assembled, click on Check Speed in the bottom. As we mentioned in the Jam burning process, it is wise to try a test burn to get a feel for the performance of your computer. If your system is having trouble keeping up with the CDR drive, read the "Troubleshooting Underruns" section at the end of this Guide. Once the test has successfully been completed, go ahead and click on Write Disc. You will get a screen that gives you the option of Write Session or Write Disc. Write Session means you will go ahead and burn a disc, but you do not close it off. Toast will still be able to write data information in another Session behind it. Write Disc means the disc is closed off, and no further sessions can be recorded. Once you've clicked on your option, the CD will start recording. [. . . ] (Common culprits are likely to be anti-virus software, screen savers, or advanced network applications. ) These can be temporarily disabled to dedicate more processing horsepower to the CD authoring software. 2) In recent years, large disk drives have become more and more affordable, but often the drives many stores advertise are quite slow. If the drive is too slow, then you'll have to try optimizing your drive. 3) Even with optimizing your hard drive, some drives may still be too slow. [. . . ]