User manual TASCAM DA-20MKII ADDENDUM

[. . . ] The VARI SPEED indicator will light and the SHIFT indicator will blink. Use the UP and DOWN ARROWS to change the speed by + or ­ 6% To exit this edit mode push the SHIFT key. The VARI SPEED indicator will remain solid until you push the VARI SPEED button again to dissable this function. Press the SHIFT key so the indicator lights Press the MENU key until the display shows MIDI Press SUB MENU key until the display shows MIDI Use the UP and DOWN ARROWS to turn MMC On or Off WARNING! [. . . ] Press the MENU key until the display reads SYSTEM Press the SUB MENU key until the display briefly reads TIME MODE, The display will now read TMD xxx Use the UP and DOWN ARROWS to choose TC (Time code) Press the MENU key until the display briefly reads TC. It will then briefly read FRM MODE (Frame mode) and finally settle on SYS . xxxx. Use the UP and DOWN ARROWS to choose the appropriate SMPTE frame rate TIMECODE = Timecode parameters (generator, display, etc. ) TIMECODE Tape TC Frame Mode Timecode Display Input Timecode Time Output Timecode Time Output Timecode Source Fast LTC ASSIGNING MIDI IDS Value TC Track, converted, ABS SYS, EXT or TAPE: 29df, 30nd, 29nd, 25, 24, 30df Off tape, External, Difference Analog, Digital Analog, Digital Tape TC, Regenerated, Reshaped 5 Frames, LEAP, OFF Description Tape timecode mode Select frame mode, showing input timecode Check the frame rate of striped timecode Showing input timecode Incoming timecode reference Outgoing timecode reference Timecode output Fast linear timecode output INTERNAL PATCHBAY TIMECODE CHASE = Parameters affecting timecode chase TIMECODE CHASE Individual Recording Rechase Mode Rechase Window Error Bypass Park Position Test ParkPosition Value 0 = Off, 1 = On Rechase, Free 1 sec. 10 Frames or 30 Frames Off, On 0 seconds 0 frames to 1 second 29 frames Description Function enabled, individual recording possible chasing TC Rechasing timecode Width of rechase window Ignore incoming TC errors Performs park position test Automatic park position setting TIMECODE RECORD = Timecode generator recording parameters TIMECODE GENERATOR TC Recording Source TC Recording Enable Start Time TC Generator Mode TC Generator Value External, TC Generator, Tape Timecode 0 = Off, 1 = On Time value in hour, minutes, seconds, frames Reset, Continue Stop, Run Description Selecting timecode source Recording timecode using the generator Start time for on-board generator Restart mode for on-board generator Stop/Start timecode generator MIDI INTERFACE = MIDI functions (ID, MMC, MTC) MIDI MIDI MIDI ID MIDI Timecode (MTC) Fast MTC Stop MTC Value On, Off All, 1 to 127 On, Off On, Off On, Off Description Enables or disables MIDI (including MTC) Assignes a MIDI ID to DA-78HR MTC output MTC output in fast wind mode MTC output in stop mode Welcome to the TASCAM DA-78HR Quick Reference Guide. This is NOT a replacement for the instruction manual, but think of this a quick reminder of the steps involved in executing various functions on the unit once you understand the concepts in the manual. The DA-78HR is a very versatile machine and we highly recommend reading the manual with the unit in front of you so you can get a better understanding of the machine. The DA-78HR has many powerful features that even the most seasoned professional will miss out on unless you read the manual to discover its depth!Here is a basic idea of how to get around on the DA-78HR. Most of the editable parameters on the unit are accessed using four keys. When the SHIFT key has been pressed with it's indicator blinking, the REPEAT/MENU key is the gateway to the menus of the DA-78HR. When the MENU key is pressed, one of these groups names are displayed on the screen and the unit enters menu mode. Xxxx represents the hours your DA-78HR will display. Fast forward the tape to the end and then rewind to the beginning. Press the FORMAT/FS key and the display will show FORMAT. Quickly (within 5 seconds) press the FORMAT/FS key again and the display will show a flashing ( F- -- -- -- ) Select a sampling rate using the FORMAT/FS key. Select the recording mode by pressing the HR MODE key. To start formatting hold down the RECORD key and press the PLAY key. SETTING AUTO PUNCH IN/OUT POINTS FROM THE FRONT PANEL. Press the AUTO IN/OUT key and the indicator will flash. Press the SHIFT key and the shift indicator will flash Press the LOC 1 (MEMO 1) key. The display will briefly read IN POINT then display the current value of the in-point. Use the UP and DOWN ARROWS to change the value then press LOC 1 key to cursor over to the right to edit the minutes, seconds and frames. Press the LOC 2 (MEMO 2) key to enter your OUT POINT in the same manner. [. . . ] Press the SUB MENU key until the display shows SAVE OFF. Press the UP ARROW key and the display will read READY. Press the UP ARROW key again to begin saving. The display will show SAVING and then DONE when the operation is complete. [. . . ]