Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TASCAM DA-98 ERROR CODES. We hope that this TASCAM DA-98 ERROR CODES user guide will be useful to you.
Lastmanuals help download the user guide TASCAM DA-98 ERROR CODES.
Manual abstract: user guide TASCAM DA-98 ERROR CODES
Detailed instructions for use are in the User's Guide.
[. . . ] No clock from MASTER Check connections and settings
No connection to the master DTRS machine. Different Fs is selected on the master DTRS machine.
Connect PW-88S cable. Clock Source: Video frame mode doesn't match. .
The Tc Frame Mode setting is different from the incoming video signal frame.
Correct the Tc Frame Mode. [. . . ] ( ## : see below )
Solution
Cycle the power and replace the tape. If a "Servo error" persists, contact TASCAM representaives.
Unable to shift mechanism mode within the five seconds of command reception. Tape is not wound into cassette half even Eject is commanded. Occurrence of tape slack during tape runs. Unable to latch solenoid on FF/REW winding. The drum motor could not work correctly in time. The capstan motor could not work correctly in time. The reel motor could not work correctly in time.
WARNING!Cannot Chase Master frame mode doesn't match.
The Tc Frame Mode setting is different from the incoming video signal frame when the CHASE is turned on.
Correct the Tc Frame Mode. TC Record Source: Not Synchronized
The incoming Timecode does not synchronize to the DA-98 system clock. The message appears when TC REC is on with the External TC selected as TC Record Source. No timecode is recorded on the tape.
Feed and record a correct timecode. Or select INTERNAL clock for CHASE if using the recorded unsynchronized timecode. Change the Tape TC Mode from Tc Track to ABS. [. . . ] Please use Ver #. ## or later
Problem
Sync ROM version does not match with the Sys ROM version.
Solution
Contact TASCAM representaives.
Error Messages on 7-seg LED
Display e. tHIn. t Problem
No - Hi8 tape is inserted. 180 - minute ) is inserted.
Solution
Use Hi8 tapes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TASCAM DA-98 ERROR CODES
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TASCAM DA-98 ERROR CODES will begin.
