User manual TASCAM DP-03

[. . . ] D01131020B DP-03 Digital Portastudio OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] SET IN pop-up message Locating to IN, OUT and TO points Regardless of whether the unit is stopped or playing back, you can press the IN [SET IN], OUT [SET OUT] or TO [SET TO] button to locate the corresponding point. You can also use the I/O SETTING screen to locate. 1 Press the LOCATE LIST [LOCATE SET] button to open a list of location marks. 46 TASCAM DP-03 7 ­ Recorder Functions 2 Press the F3 (POINT) button to open the I/O SETTING screen. To return to the home screen without locating to the point, press the F1 (EXIT) or HOME button instead. Using repeat playback NOTE If the current song does not have any location marks, the location mark list will not open. A "No Locate Mark" pop-up appears briefly and then the I/O SETTING screen opens. 3 Use the DATA wheel to select the mark, and press the F4 (JUMP) button to locate to the designated point. Editing IN, OUT and TO points 1 Press the LOCATE LIST [LOCATE SET] button to open the location mark list. 1 Set the starting (IN) and ending (OUT) points for the time that you want to repeat, and then return to the Home Screen. 2 Press the REPEAT button to start repeat playback. The repeat icon on the Home Screen appears. Repeat icon 2 Press the F3 (POINT) button to open the I/O SETTING screen. NOTE If the current song does not have any location marks, the location mark list will not open. A No Locate Mark pop-up appears briefly and then the I/O SETTING screen opens. 3 Use the DATA wheel to select a mark, and press the F2 (EDIT) button to open the I/O SETTING screen in editing mode. Playback starts from the IN point. When the OUT point is reached, after the repeat interval elapses, playback starts again from the IN point. Playback continues to repeat between the IN and OUT points. 3 Press the REPEAT button again to stop repeat playback. The repeat icon on the Home Screen disappears. The next section explains how to set the repeat interval that determines the amount of time until playback starts again after the OUT point is reached. Setting the interval between repetitions The interval can be set from 1. 0 to 9. 9 seconds. 1 When the recorder is stopped, press the MENU button to open the MENU screen. 2 Turn the DATA wheel to select PREFERENCE, and press the F4 (¥) button to open the PREFERENCE screen. 3 Use the F3 (§) and F4 (¶) buttons to select the setting value for the Repeat Int item. Turn the DATA wheel to set the value from 1. 0 to 9. 9 sec. units. 4 Use the F3 () and F4 () buttons to move the time unit cursor. 5 Use the DATA wheel to change the value of the unit at the cursor. [. . . ] MUTE See "Muting tracks" on page 54 See "Editing names" on page 35. MENU ® SONG ® NAME EDIT See "Mastering the stereo master track" MIXDOWN/MASTERINGx2 ® F3 on page 56. BOUNCE See "Bouncing tracks" on page 43. See "Checking the stereo master track" MIXDOWN/MASTER x 2 on page 55 See "Protecting songs" on page 37. [. . . ]