User manual TASCAM DV-RA1000HD

[. . . ] » Changes in Version 2. 0 AIFF file reading DV-RA1000HD V2. 0 Supplemental Manual The following functions features have been added in Version 2. 0. Creating CDs from DSD projects The following specifications have been changed in Version 2. 0. As in PCM mode, sound level in DSD mode can also be set to -72dB, -66dB, -60dB, and -54dB. [. . . ] In Version 2. 0, AIFF files are also recognized and can be added to play lists. AIFF files can be imported just like WAV files (see page 60 of the Owner s Manual). NOTE AIFF files are converted into WAV files. Reading AIFF files takes time (about 40 seconds for a 5-minute, 44. 1-kHz, 24-bit file). A file is not recognized if its sampling frequency or quantization bit rate differs from that of the project. Creating CDs from DSD projects Previously when creating a CD-DA from projects on the unit s hard disk, only 44. 1 kHz projects could be chosen. In Version 2. 0, DSD projects can also be chosen. Otherwise, the function for creating an audio CD has not changed and can be used as before (see page 52 of the Owner s Manual). NOTE The actual file time is necessary to convert a DSD project to CD-DA (not including the amount of time to write it to the CD-DA). The data converted from DSD to PCM is stored on the HD during the process. If there is not enough open space on the HD, you will not be able to select DSD files that are too large. [. . . ] This is to prevent any pop noise being heard between tracks, caused by the nature of the DSD process. For this reason, tracks that sounded continuous (gapless) before will have gaps between them after conversion. TEAC CORPORATION Phone 81-422-52-5082 3-7-3 Nakacho, Musashino-shi, Tokyo 180-8550, Japan » DV-RA1000HD Ver2. 0 180-8550 : 0422-52-5072 3-7-3 Printed in China [. . . ]